Chipper operator jobs in Finland
Chipper operators tend machines that chip wood into small pieces for use in particle board, for further processing into pulp, or for use in its own right. Wood is fed into the chipper and shredded or crushed using a variety of mechanisms.
Chipper operator – how much is the pay in Finland?
What the trade paid in 2024
| Median | 17.77 €/h |
|---|---|
| Bottom tenth | 13.65 €/h |
| Top tenth | 22.28 €/h |
| Employees | 5,662 |
Pay by sex, 2024
| Sex | Median | Employees |
|---|---|---|
| Women | 17.77 €/h | 765 |
| Men | 17.77 €/h | 4,897 |
Chipper operator - Which skills are essential?
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Monitor in-feed and clear the chipper equipment of debris to avoid blockages and jams in order to secure a free flow of materials.
Identify operating problems, decide what to do about it and report accordingly.
Check and safely operate machines and equipment required for your work according to manuals and instructions.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Select logs from storage and coordinate their transportation. Keep up with schedules and production requirements.
Adjust cut sizes and depths of cutting tools. Adjust heights of worktables and machine-arms.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Identify dull edges to sharp tools, or any defect in the edge. Use appropriate equipment to safely and effectively sharpen the tool. Maintain and protect sharpened tools. Report irreparable faults to the appropriate person.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Drive chipper trucks or vans, from which the machine is often controlled and operated. Use the vehicle for pickups of processed wood materials in forest job sites.
Operate wood chipper machine by inserting long logs, poles, and pieces of timber, producing wood chips.
Chipper operator - Which skills are useful but not essential?
Replace worn and bent knives and adjust cutting knives, making use of various hand tools.
Key features, advantages and limitations of the different timbers and timber based products sold at a company and where to access this information.
Use hand-fed machinery for timber processing. Saw with a mobile saw bench, mechanically process firewood, split stakes, and use pointing machines, peelers and wood chippers.
Work with heavy construction machinery independently without the intervention of a supervisor. Take responsibility for your decisions and actions.
Operate a hydraulic grappler, an attachment to heavy machinery used to grab and manipulate cylindrical objects such as trees or pipes. Lift up the object, safely manoeuvre it, and set it down in the desired position.
Monitor the performance of heavy-duty equipment. Record troubleshooting, ensure that all operations comply with safety and health requirements.
Dispose of waste materials which pose no risk to health and safety in a manner which complies with recycling and waste management procedures.
De-limb trees ensuring that the quality is within specified limits.
Meet contract specifications, schedules and manufacturers' information. Check that the work can be carried out in the estimated and allocated time.
Measure the amount of timber felled using appropriate equipment. Take care of the equipment. Record the measured data.
Perform safety audits and inspections on workplaces and workplace equipment. Ensure that they meet safety regulations and identify hazards and risks.
Use spanners to adjust machinery and equipment.
Set up and monitor the machine that strips remaining bark from timber or logs before they can be further processed, for example chipped for pulp production.
Check machinery and equipment to ensure reliable performance during use and operations in worksites.
Carry out tree inspections and surveys.
Identify the main types of timber based products to be received at your company. Stack and store timber based products safely and in compliance with company procedures.
Prepare a comprehensive and unbiased report on wood technology production and progressive development of wood based materials.
Check the quality of basic materials used for the production of semi-finished and finished goods by assessing some of its characteristics and, if needed, select samples to be analysed.
Types of cutting blades used in the sawing process, such as band saw blades, crosscut blades, plytooth blades and others, made from tool steel, carbide, diamond or other materials.
Inspect the stock to find out how much is left. Identify any damaged, faulty, or out of date items and move them to the appropriate location. Follow stock rotation methods to ensure stock is used effectively. Handle goods using safe and approved handling methods.
Identify the main types of timber to be received at your company. Stack and store timber safely and in compliance with company procedures.
Check machine equipment for proper performance and detect faults and malfunctions. Diagnose malfunctions using testing equipment to determine the required repair.
Types of machines used for reducing wood (generally tree limbs or trunks) into smaller woodchips and properties of each.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
Evaluate the quality of the felled timber.