Construction painting supervisor jobs in Finland
Construction painting supervisors plan, direct and oversee the work of the crew of painters assigned to a certain project or location. They supervise and evaluate the work of painters.
Construction painting supervisor - Which skills are essential?
Provide advice on and test a wide range of construction materials.
Make up prices and documents for the products that customers may purchase.
Make sure the materials are fit to be used together, and if there are any foreseeable interferences.
Oversee all personnel and processes to comply with health, safety and hygiene standards. Communicate and support alignment of these requirements with the company's health and safety programmes.
Evaluate how much stock is used and determine what should be ordered.
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Check construction supplies for damage, moisture, loss or other problems before using the material.
Plan, schedule and monitor the building processes in order to ensure completion of the project by the set deadline.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
Varieties of paint and chemicals used in their composition.
Plans shifts of employees to ensure completion of all customer orders and satisfactory completion of the production plan.
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
Inspect a painted surface, either one recently painted or an old layer. Watch for dents, cracks, flaking, air bubbles, mould and other issues.
Evaluate the need for labour for the work ahead. Evaluate the performance of the team of workers and inform superiors. Encourage and support the employees in learning, teach them techniques and check the application to ensure product quality and labour productivity.
Oversee the selection, training, performance and motivation of staff.
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Demonstrate how to use a product in a correct and safe manner, provide customers with information on the product's main features and benefits, explain operation, correct use and maintenance. Persuade potential customers to purchase items.
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
Liaise with managers of other departments ensuring effective service and communication, i.e. sales, planning, purchasing, trading, distribution and technical.
Construction painting supervisor - Which skills are useful but not essential?
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Remove paint by using chemical strippers, a heat gun, sanding or scraping the surface.
Administer cardiopulmonary resuscitation or first aid in order to provide help to a sick or injured person until they receive more complete medical treatment.
Use different types of drywall sanders, automatic or manual, handheld or on an extension, to sand surfaces to a smooth finish or to rough them up for better adhesion.
Dispose of dangerous materials such as chemical or radioactive substances according to environmental and to health and safety regulations.
Hire new employees by scoping the job role, advertising, performing interviews and selecting staff in line with company policy and legislation.
Dispose of waste materials which pose no risk to health and safety in a manner which complies with recycling and waste management procedures.
Use a paint gun to coat or paint surfaces of items which are stationary or moving on a conveyor belt. Load the equipment with the suitable type of paint and spray the paint onto the surface in an even and controlled manner to prevent paint from dripping or splashing.
Regulations on construction products quality standards applied throughout the European Union.
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
Operate a semi-automatic or handheld spray gun designed to provide the surface of a workpiece with a permanent, corrosion-protective finishing coat, safely and according to regulations.
Make sure the surface to be painted is free of scratches and dents. Assess the porosity of the wall and the need for coating. Remove any grease, dirt, moisture and traces of previous coverings.
The process of planning, monitoring and adjusting the expenses and revenues of a business in order to achieve cost efficiency and capability.
Take the necessary precautions for storing, using and disposing chemical products.
Install a variety of metal or plastic profiles used to attach materials to each other or to structural elements. Cut them to size if called for.
Negotiate the terms, conditions, costs and other specifications of a contract while making sure they comply with legal requirements and are legally enforceable. Oversee the execution of the contract, agree on and document any changes.
Smoothen the surface of a workpiece by sanding it in between applying coats in order to obtain a clear, stronger coat.
Thoroughly mix different types of paint manually or mechanically. Start from basic paints or from powder and mix in water or chemicals. Check the consistency of the resulting mixture.
Recognise the symptoms of metal showing oxidation reactions with the environment resulting in rusting, copper pitting, stress cracking, and others, and estimate the rate of corrosion.
Use brushes and rollers to apply a coat of paint to a prepared surface evenly and without leaving drops.
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
Provide expert knowledge in a particular field, especially concerning mechanical or scientific subjects, to decision makers, engineers, technical staff or journalists.
Reach an agreement with the supplier upon technical, quantity, quality, price, conditions, storage, packaging, send-back and other requirements related to the purchasing and delivering process.
Blast a surface with sand, metal shot, dry ice or other blasting material to remove impurities or rough up a smooth surface.
Lead and guide employees through a process in which they are taught the necessary skills for the perspective job. Organise activities aimed at introducing the work and systems or improving the performance of individuals and groups in organisational settings.
Take necessary precautions and follow a set of measures that assess, prevent and tackle risks when working at a high distance from the ground. Prevent endangering people working under these structures and avoid falls from ladders, mobile scaffolding, fixed working bridges, single person lifts etc. since they may cause fatalities or major injuries.