Drill press operator jobs in Finland
Drill press operators set up and operate drill presses designed to cut excess material from or enlarge a hole in a fabricated workpiece using a hardened, rotary, multipointed cutting tool that inserts the drill into the workpiece axially.
Drill press operator – how much is the pay in Finland?
What the trade paid in 2024
| Median | 18.51 €/h |
|---|---|
| Bottom tenth | 14.37 €/h |
| Top tenth | 24.18 €/h |
| Employees | 13,244 |
Pay by sex, 2024
| Sex | Median | Employees |
|---|---|---|
| Women | 16.45 €/h | 827 |
| Men | 18.66 €/h | 12,417 |
Drill press operator - Which skills are essential?
Supply the machine with the necessary tools and items for a particular production purpose.
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
Identify operating problems, decide what to do about it and report accordingly.
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
The most optimal rotation or cycle time and over-all quality of a tool or a machine's processes.
Measure the size of a processed part when checking and marking it to check if it is up to standard by use of two and three dimensional precision measuring equipment such as a caliper, a micrometer, and a measuring gauge.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Dispose of possibly hazardous waste material created in the cutting process, such as swarf, scrap and slugs, sort according to regulations, and clean up workplace.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Operate a semi-automated, semi-manual drill press to drill holes in a work piece, safely and according to regulations.
Comply with precision standards specific to an organisation or product in metalworking, involved in processes such as engraving, precise cutting, welding.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Qualities and applications of various types of drill bits, such as core drill bits, spotting drill bits, countersink drill bits and others.
Drill press operator - Which skills are useful but not essential?
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
Manipulate the properties, shape and size of plastic.
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Keep records of the machine's faults, interventions and irregularities for quality control.
The variety of cutting technologies, such as software or mechanics, guiding cutting processes through lasering, sawing, milling etc.
Test processed workpieces or products for basic faults.
Evaluate how much stock is used and determine what should be ordered.
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
Employ cross-reference tools and programmes, listing file names and line numbers, to identify part numbers, descriptions, and the vendor as source of origin.
The manufacture of reservoirs, tanks and similar containers of metal, of types normally installed as fixtures for storage or manufacturing use. The manufacture of metal containers for compressed or liquefied gas.
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
The manufacture of rivets, washers and similar non-threaded products, screw machine products, screws, nuts and similar threaded products.
The qualities and applications of various kinds of dies, the different components of a die (such as the die block, punch plate, pierce punch and others) and the types of die used in specialised manufacturing processes ( such as extrusion dies, drawing dies, forming dies, cutting dies, compound dies, and others).
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
Inspect and mark parts of the workpiece to indicate how they will fit into the finished product.
Handle and operate a punch and hammer to mark a metal work piece, for example for the purpose of carving a serial number, or for drilling to mark the exact place where a the hole should be places in order to keep the drill steady.
Types of plastic materials and their chemical composition, physical properties, possible issues and usage cases.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
The manufacture of electrical ovens and water heaters by metalworking processes.
The manufacture of tins and cans for food products, collapsible tubes and boxes, and of metallic closures.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Operate various sizes and types of files used for removing burrs from and smoothening the edges of a workpiece.
The manufacture of knives and cutting blades for machines or for mechanical appliances, hand tools such as pliers, screwdrivers etc. The manufacture of non-power-driven agricultural hand tools, saws and saw blades, including circular saw blades and chainsaw blades. The manufacture of interchangeable tools for hand tools, whether or not power-operated, or for machine tools: drills, punches, milling cutters etc. The manufacture of press tools, moulding boxes and moulds (except ingot moulds), vices and clamps, and blacksmiths’ tools: forges, anvils etc.
Operate temperature gauges to maintain food and drink items at appropriate temperatures.
Types of oil such as (sulphurarised) cutting oils, WD-40, 3-IN-ONE and others used in the drilling process to function as a lubricant that facilitates a smooth drilling process, keeps the drill bit cool and increases its durability.
The manufacture of steam or other vapour generators, the manufacture of auxiliary plant for use with steam generators: condensers, economisers, superheaters, steam collectors and accumulators. The manufacture of nuclear reactors, parts for marine or power boilers. Also the production of pipe system construction comprising further processing of tubes generally to make pressure pipes or pipe systems together with the associated design and construction work.