Extrusion machine operator jobs in Finland
Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Extrusion machine operator – how much is the pay in Finland?
What the trade paid in 2024
| Median | 19.36 €/h |
|---|---|
| Bottom tenth | 14.22 €/h |
| Top tenth | 24.89 €/h |
| Employees | 5,344 |
Pay by sex, 2024
| Sex | Median | Employees |
|---|---|---|
| Women | 17.37 €/h | 588 |
| Men | 19.71 €/h | 4,756 |
Extrusion machine operator - Which skills are essential?
The various processes used for extrusion, the creation of objects of a cross-sectional nature, in metalworking, such as direct extrusion, indirect extrusion, hydrostatic extrusion, hot extrusion, warm extrusion, cold extrusion, and others.
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
Identify operating problems, decide what to do about it and report accordingly.
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
Monitor the processing of a workpiece in motion, such as a piece of metal or wood moved linearly over a static manufacturing machine.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
The qualities and applications of various kinds of dies, the different components of a die (such as the die block, punch plate, pierce punch and others) and the types of die used in specialised manufacturing processes ( such as extrusion dies, drawing dies, forming dies, cutting dies, compound dies, and others).
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
Evaluate if a replacement of the die of a machine is deemed beneficial and take the necessary actions for replacing it either manually (depending on its size, by the use of a manual lifting tackle) or mechanically.
Extrusion machine operator - Which skills are useful but not essential?
Method of quality control that uses statistics to monitor processes.
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Keep records of the machine's faults, interventions and irregularities for quality control.
The manufacture of different cutlery items, such as forks, spoons, knives, razors or scissors.
Test processed workpieces or products for basic faults.
The most optimal rotation or cycle time and over-all quality of a tool or a machine's processes.
Evaluate how much stock is used and determine what should be ordered.
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
Tend an extrusion machine designed for forming cold metal whilst right below its recrystallisation temperature, monitor and operate it, according to regulations.
The manufacture of flatware , hollowware , dinnerware and other non-electrical utensils for use at the table or in the kitchen.
The variety of technologies and techniques, such as forging, pressing, stamping, rolling and others, used for the forming processes of metal product manufacturing.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Monitor the flow of the work pieces on the conveyor belt as they are processed by the machine to ensure optimal productivity.
Read and comprehend standard blueprints, machine, and process drawings.
Use computer-aided manufacturing (CAM) programmes to control machinery and machine tools in the creation, modification, analysis, or optimisation as part of the manufacturing processes of workpieces.
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
The manufacture of rivets, washers and similar non-threaded products, screw machine products, screws, nuts and similar threaded products.
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
Offer help and advice to service technicians in case of machine malfunctions and other repair tasks.
Inspect and mark parts of the workpiece to indicate how they will fit into the finished product.
Types of plastic materials and their chemical composition, physical properties, possible issues and usage cases.
Tend an extrusion machine designed for forming hot metal whilst right above its recrystallisation temperature, monitor and operate it, according to regulations.
Check the quality of basic materials used for the production of semi-finished and finished goods by assessing some of its characteristics and, if needed, select samples to be analysed.
Set up the desired product design in the CNC controller of the CNC machine for product manufacturing.
Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
The manufacture of metal items that can be attached to a door in order to support its function and appearance. The manufacture of padlocks, locks, keys, hinges and the like, and hardware for buildings, furniture, vehicles etc.
Transport heavy objects using lifting equipment such as cranes, forklifts etc.
The manufacture of tins and cans for food products, collapsible tubes and boxes, and of metallic closures.
Understand and assess the models and symbolic language of the GD&T system indicating engineering tolerances.
The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
The manufacture of knives and cutting blades for machines or for mechanical appliances, hand tools such as pliers, screwdrivers etc. The manufacture of non-power-driven agricultural hand tools, saws and saw blades, including circular saw blades and chainsaw blades. The manufacture of interchangeable tools for hand tools, whether or not power-operated, or for machine tools: drills, punches, milling cutters etc. The manufacture of press tools, moulding boxes and moulds (except ingot moulds), vices and clamps, and blacksmiths’ tools: forges, anvils etc.
The manufacture of steam or other vapour generators, the manufacture of auxiliary plant for use with steam generators: condensers, economisers, superheaters, steam collectors and accumulators. The manufacture of nuclear reactors, parts for marine or power boilers. Also the production of pipe system construction comprising further processing of tubes generally to make pressure pipes or pipe systems together with the associated design and construction work.