Lift technician jobs in Finland
Lift engineers set lifts into a prepared framed hoistway. They install support assembly, set up the lift pump or motor, piston or cable, and mechanism. Lift engineers connect the necessary electronic elements to complete the installation and connection of the lift cabin. They also perform the necessary steps to inspect and repair lifts, as well as the shaft and any associated electronics. Lift engineers make sure every inspection and report action is noted in a log book, and report to the client on the state of the serviced lift.
Lift technician – how much is the pay in Finland?
What the trade paid in 2024
| Median | 20.18 €/h |
|---|---|
| Bottom tenth | 14.96 €/h |
| Top tenth | 27.57 €/h |
| Employees | 10,465 |
Pay by sex, 2024
| Sex | Median | Employees |
|---|---|---|
| Women | 17.77 €/h | 415 |
| Men | 20.27 €/h | 10,050 |
Lift technician - Which skills are essential?
Install the lift governor, which controls the movement speed and braking mechanisms of the lift, in the machine room at the top of the shaft. Calibrate the governor and link it up with the motor, control mechanism, and a source of electricity.
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Identify, report and repair equipment damage and malfunctions; communicate with field representatives and manufacturers to obtain repair and replacement components.
Use welding equipment to melt and join together pieces of metal or steel; wear protective eyewear during the working process.
Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.
Identify operating problems, decide what to do about it and report accordingly.
Securely install the necessary equipment to guide the movement of a lift in the shaft, and to facilitate maintenance. Attach rails to the sides of the shaft to guide the movement of the car. Install service ladders for maintenance and emergency purposes.
Guide the process where a crane hoists the lift car to the top of the finished shaft and lowers it along the support rails. Communicate with the crane operator during the car installation to ensure correct and safe installation.
Check construction supplies for damage, moisture, loss or other problems before using the material.
Install equipment which is dependent on electric currents or electromagnetic fields in order to work, or equipment to generate, transfer or measure such currents and fields. This equipment includes switchboards, electric motors, generators or direct current systems.
Various types of lifts, based on their mode of operation, such as hydraulically powered lifts. Various lift operation schemes and configurations.
Check machinery and equipment to ensure reliable performance during use and operations in worksites.
The power transmission systems that use the force of flowing liquids to transmit power.
Mechanical systems, including gears, engines, hydraulic and pneumatic systems. Their functions and likely defects.
Secure the operation site fixing boundaries, restricting access, placing signs and taking other measures in order to guarantee public and staff safety.
Install systems and components that use liquid fluid power to create mechanical movements such as hydraulic pumps, valves, hydraulic motors, hydraulic cylinders and other elements that power hydraulic machinery.
Perform the maintenance on installed equipment on-site. Follow procedures to avoid uninstalling equipment from machinery or vehicles.
Install systems and components that use pneumatics to create mechanical movements such as air brakes, pneumatic cylinders, air compressors and other systems.
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
The various mechanisms to prevent a lift from falling. Lift governor operation and safety brake operation mechanisms.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
The application of pressurised gas to produce mechanical motion.
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Understand the principles of electricity and electrical power circuits, as well as the associated risks.
Pictorial representation of an electrical circuit. It shows the components of the circuit as simplified shapes, and the power and signal connections between the devices. It gives information about the relative position and arrangement of devices and terminals on the devices, to help in building or servicing the device. A wiring diagram is often used to troubleshoot problems and to make sure that all the connections have been made and that everything is present.
Local legislation on lift safety mechanisms, loading limits, speed limits and installation procedures.
Configure the lift controller to make sure the lift operates correctly and efficiently. Set the desired operating mode for one lift or for lift group operation. Maximise comfort while minimising travel time.
Install the lift controller, which processes and transmits lift control signals to the motor, in the machine room at the top of the shaft. Connect it to the hoist motor, a source of electricity, and the control input signal wires.
Theoretical and practical applications of the science studying the action of displacements and forces on physical bodies to the development of machinery and mechanical devices.
Use soldering equipment, such as a soldering gun, a soldering torch or a gas-powered iron, to melt and join together pieces of metal or steel.
Test all features of a lift to ensure proper and efficient functioning.
Lift technician - Which skills are useful but not essential?
Determine the ratio of the rotational speed of interlocking gears which can be calculated from the number of teeth on the drive and driven gears.
Utilise computer equipment or digital devices to facilitate quality control, data management, and communication. Follow instructions given by a computer programme, create computer files or documents.
Identify and assess factors that may jeopardise the success of a project or threaten the organisation's functioning. Implement procedures to avoid or minimise their impact.
Command products from relevant suppliers to get convenient and profitable products to purchase.
ReNovate and modernise buildings and equipment which can include technical or decorative improvements such as replace lighting, install new flooring, refresh paint and other modifications.
Provide relevant recommendations following the conclusion of an investigation; ensure that recommendations are duly considered and where appropriate acted upon.
Assist people stuck in limited spaces such as lifts or amusement park attractions, explain the situation in a calm manner, give instructions as to the proper reaction and rescue them.
Safely attach loads to different types of hooks and attachments, taking into account the weight of the load, the power available to move it, static and dynamic tolerances of all instruments and materials, and the mass distribution of the system. Communicate with the operator verbally or with gestures to ensure the safety and efficiency of the operation. Detach loads.
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Monitor the construction of the lift shaft in a building. Make sure the shaft is straight and structurally sound to support safe operation of a lift.
Ensure that proper and functional security systems are in place, including alarm systems, fire alarms, sprinklers and emergency exits.
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
Identify problems with servers, desktops, printers, networks, and remote access, and perform actions which solve the problems.
Estimate the cost implications of restoring and replacing products or parts.
Remove defective parts and replace them with functioning components.
The functioning of electronic circuit boards, processors, chips, and computer hardware and software, including programming and applications. Apply this knowledge to ensure electronic equipment runs smoothly.
File and organise personal administration documents comprehensively.
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
Inform customers about necessary repairs or replacements, discuss products, services and costs, include accurate technical information.
Prepare documents with legal value which prove that an installation or a facility is conform to the regulations.
Install the electric motor which will hoist the lift up and down in the machine room at the top of the shaft. Securely attach the lift hoist and governor cables to the lift car, its pulleys and the installed motor.
Explain technical details to non-technical customers, stakeholders, or any other interested parties in a clear and concise manner.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Guide a colleague in operating a piece of heavy construction equipment. Follow the operation closely and understand when feedback is called for. Use communication techniques like voice, two-way radio, agreed-upon gestures and whistles to signal the appropriate information to the operator.
Prepare the invoice of goods sold or services provided, containing individual prices, the total charge, and the terms. Complete order processing for orders received via telephone, fax and internet and calculate the customer’s final bill.
Write records of the repairs and maintenance interventions undertaken, of parts and materials used, and other repair facts.
Take necessary precautions and follow a set of measures that assess, prevent and tackle risks when working at a high distance from the ground. Prevent endangering people working under these structures and avoid falls from ladders, mobile scaffolding, fixed working bridges, single person lifts etc. since they may cause fatalities or major injuries.