Pulp control operator jobs in Finland
Pulp control operators operate and monitor multi-function process control machinery and equipment to control the processing of wood, scrap pulp, recycable paper and other cellulose materials in the production of pulp. They set up, operate and maintain the machinery, analyse the production results and adjust the process when necessary.
Pulp control operator - Which skills are essential?
This includes the stationary and rotary steam digesters, which cook wood chips in an acid solution to make pulp for use in the manufacture of paper.
Identify operating problems, decide what to do about it and report accordingly.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Check and safely operate machines and equipment required for your work according to manuals and instructions.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Avoid lesser quality and lower grades of recycled paper and pulp by keeping an eye open for stickies, plastics, colour, unbleached fibres, brightness, and dirt.
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
Set up, operate and maintain specialised machinery and equipment to control the creation of pulp from wood, recyclable paper, and other cellulose materials.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Add cooking chemicals and steam to dissolve lignin and separate the plant fibres, breaking down wood chips to recover pulp after a bleaching and drying process.
Field of information which distinguishes different kinds of moulded fibres such as thickwall, transfer moulded, thermoformed, and processed fibre types.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Set up or adjust machine controls to regulate conditions such as material flow, temperature, or pressure.
Kinds of pulp are distinguished based on their fibre type and the specific chemical processes through which they were created.
Pulp control operator - Which skills are useful but not essential?
Acquire test samples at various stages of the paper deinking and paper recycling process. Process the samples, e.g. by adding a measured amount of dye solution, and test them to determine values such as the pH level, the tear resistance or the degree of disintegration.
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
Oversee pulp quality based on their pulping process, raw materials, yield, fibre length and other categories such as dirt, moisture content, porosity, density, and brightness.
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Keep records of the machine's faults, interventions and irregularities for quality control.
Measure the weight and concentration of the pulp slurry for further processing and storage by using disk filters and calculating slurry density with specific formulas.
Maintain records and process facts and figures about type and volume of different recycling operations.
Dispose of waste materials which pose no risk to health and safety in a manner which complies with recycling and waste management procedures.
Open valve to admit water into pulp-mixing vat. Weigh and dump specified amounts of different ingredients such as scrap paper, rosin, wax and other binders into the vat. Transfer the mixed slurry to a storage or slurry tank.
Mix pulp and cotton wool, which are shot out of the machine and woven into pulp strips. These can consequently be cut and shaped into diapers and other disposable pad products.
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
Prepare a comprehensive and unbiased report on wood technology production and progressive development of wood based materials.
Coordinate and oversee shipments of recycling materials. Communicate with processing companies and shipping brokers.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Shape paperboard flats by using formation moulds, which vacuum pulp and windsoft the excess material. Transfer the materials to a conveyor belt. Apply waterproof lubricants so the flats won't stick to the mould and put the flats in an oven, after which the rigid material is stacked and made ready to be packaged.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Various deinking processes such as flotation, bleaching, and washing. These are used to remove ink from the paper in preparation for producing new paper.
Set up and monitor the blender that crushes wastepaper and dry pulp sheets and mixes them with water to produce slurry for the production of paper and paper-related products.