Filing machine operator jobs in Finland
Filing machine operators set up and tend filing machines such as band files, reciprocating files and bench filing machines in order to smoothen metal, wood or plastic surfaces by precisely cutting and removing small amounts of excess material.
Filing machine operator – how much is the pay in Finland?
What the trade paid in 2024
| Median | 17.42 €/h |
|---|---|
| Bottom tenth | 13.71 €/h |
| Top tenth | 22.56 €/h |
| Employees | 1,536 |
Pay by sex, 2024
| Sex | Median | Employees |
|---|---|---|
| Women | 16.50 €/h | 208 |
| Men | 17.65 €/h | 1,328 |
Filing machine operator - Which skills are essential?
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
The most optimal rotation or cycle time and over-all quality of a tool or a machine's processes.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Dispose of possibly hazardous waste material created in the cutting process, such as swarf, scrap and slugs, sort according to regulations, and clean up workplace.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Tend a filing machine designed to smoothen a metal, wood or plastic surface and remove rough edges by applying filing, abrasive machine processes, monitor and operate it according to regulations.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Types of files used for filing metal, wood or plastic workpieces, such as mill files, barrette files, checkering files, coin pointed files, joint round edge files and others.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Inspect and smooth burred surfaces of steel and metal parts.
The various parts, their characteristics and applications, of a machine designed to file and finish metal, wood or plastic workpieces, such as a cone point file, set screw, centre plate, adapter, file band, upper guide, post, back-up support, and others.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
Filing machine operator - Which skills are useful but not essential?
Various processing methods on non-ferrous metals and alloys such as copper, zinc and aluminium.
Steps in the processing of wood for the manufacturing of wooden articles and types of machines used for these processes such as drying, shaping, assembling and surface finishing.
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
Manipulate the properties, shape and size of plastic.
Keep records of the machine's faults, interventions and irregularities for quality control.
The variety of cutting technologies, such as software or mechanics, guiding cutting processes through lasering, sawing, milling etc.
The manufacture of different cutlery items, such as forks, spoons, knives, razors or scissors.
Observe and identify various kinds of imperfections in metal workpieces or finished products. Recognise the best fitted manner of fixing the problem, which could be caused by corrosion, rust, fractures, leaks, and other signs of wear.
Measure the size of a processed part when checking and marking it to check if it is up to standard by use of two and three dimensional precision measuring equipment such as a caliper, a micrometer, and a measuring gauge.
Monitor the processing of a workpiece in motion, such as a piece of metal or wood moved linearly over a static manufacturing machine.
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
The manufacture of flatware , hollowware , dinnerware and other non-electrical utensils for use at the table or in the kitchen.
The manufacture of metal cable, plaited bands and other articles of that typr, uninsulated or insulated cable not capable of being used as a conductor of electricity, coated or cored wire as well as barbed wire, wire fencing, grill, netting, cloth etc. Manufacture of coated electrodes for electric arc-welding, nails and pins, chain and springs (except watch springs): as well as leaves for springs.
The manufacture of reservoirs, tanks and similar containers of metal, of types normally installed as fixtures for storage or manufacturing use. The manufacture of metal containers for compressed or liquefied gas.
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
The manufacture of rivets, washers and similar non-threaded products, screw machine products, screws, nuts and similar threaded products.
The qualities and applications of various kinds of dies, the different components of a die (such as the die block, punch plate, pierce punch and others) and the types of die used in specialised manufacturing processes ( such as extrusion dies, drawing dies, forming dies, cutting dies, compound dies, and others).
Comply with precision standards specific to an organisation or product in metalworking, involved in processes such as engraving, precise cutting, welding.
Types of plastic materials and their chemical composition, physical properties, possible issues and usage cases.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Measure the evenness of a workpiece's surface after it has been processed by checking for deviations from the desired perpendicular state.
Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
The manufacture of metal items that can be attached to a door in order to support its function and appearance. The manufacture of padlocks, locks, keys, hinges and the like, and hardware for buildings, furniture, vehicles etc.
The manufacture of tins and cans for food products, collapsible tubes and boxes, and of metallic closures.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
Operate various sizes and types of files used for removing burrs from and smoothening the edges of a workpiece.
The various technologies used for the smoothening, polishing and buffing of fabricated metal workpieces.
Produce goods designed and created to fit the specific needs or request of a customer.
Theoretical and practical applications of the science studying the action of displacements and forces on physical bodies to the development of machinery and mechanical devices.
The various machining principles and processes employing abrasives, (mineral) materials that can shape a workpiece by eroding excessive parts of it, such as grinding, honing, sanding, buffing, diamond wire cutting, polishing, abrasive blasting, tumbling, water-jet cutting, and others.