Metal polisher jobs in Finland
Metal polishers use metal working equipment and machinery to polish and buff almost finished metal workpieces in order to enhance their smoothness and appearance and to remove oxidisation, tarnishing the metal after the other fabrication processes. They may operate equipment using diamond solutions, silicon-made polishing pads, or working wheels with a leather polishing strop, and tend to these materials ensuring their effectiveness.
Metal polisher – how much is the pay in Finland?
What the trade paid in 2024
| Median | 17.39 €/h |
|---|---|
| Bottom tenth | 13.87 €/h |
| Top tenth | 22.35 €/h |
| Employees | 987 |
Metal polisher - Which skills are essential?
The different processes, or motions, used in polishing, depending on the desired end result concerning the level of smoothness and shininess of the metal workpiece: cut motion or colour motion.
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
Identify operating problems, decide what to do about it and report accordingly.
Observe and identify various kinds of imperfections in metal workpieces or finished products. Recognise the best fitted manner of fixing the problem, which could be caused by corrosion, rust, fractures, leaks, and other signs of wear.
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
The most optimal rotation or cycle time and over-all quality of a tool or a machine's processes.
Monitor the processing of a workpiece in motion, such as a piece of metal or wood moved linearly over a static manufacturing machine.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
Apply the appropriate lubricant matching the kind of metal of the processed metal workpiece during polishing processes, such as was or kerosene.
Metal polisher - Which skills are useful but not essential?
Various processing methods on non-ferrous metals and alloys such as copper, zinc and aluminium.
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
Supply the machine with the necessary tools and items for a particular production purpose.
Keep records of the machine's faults, interventions and irregularities for quality control.
The manufacture of different cutlery items, such as forks, spoons, knives, razors or scissors.
The various parts, their qualities and applications, of a metalworking machine designed for buffing and polishing metal surfaces, such as the brush head, contact roller head, drum, drum base, lock bar, shell, and others.
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
The manufacture of flatware , hollowware , dinnerware and other non-electrical utensils for use at the table or in the kitchen.
The manufacture of metal cable, plaited bands and other articles of that typr, uninsulated or insulated cable not capable of being used as a conductor of electricity, coated or cored wire as well as barbed wire, wire fencing, grill, netting, cloth etc. Manufacture of coated electrodes for electric arc-welding, nails and pins, chain and springs (except watch springs): as well as leaves for springs.
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
The manufacture of rivets, washers and similar non-threaded products, screw machine products, screws, nuts and similar threaded products.
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
Offer help and advice to service technicians in case of machine malfunctions and other repair tasks.
Inspect and mark parts of the workpiece to indicate how they will fit into the finished product.
Comply with precision standards specific to an organisation or product in metalworking, involved in processes such as engraving, precise cutting, welding.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Measure the evenness of a workpiece's surface after it has been processed by checking for deviations from the desired perpendicular state.
Operate an abrasive blaster using sand to erode and smoothen a rough surface.
Inspect and smooth burred surfaces of steel and metal parts.
Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
The manufacture of metal items that can be attached to a door in order to support its function and appearance. The manufacture of padlocks, locks, keys, hinges and the like, and hardware for buildings, furniture, vehicles etc.
The manufacture of tins and cans for food products, collapsible tubes and boxes, and of metallic closures.
Operate equipment designed to buff and polish metal workpieces, such as diamond solutions, silicon-made polishing pads, or working wheels with a leather polishing strop, and others.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Tend a metalworking machine designed to buff and polish metal surfaces, monitor and operate it according to regulations.
The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
The various technologies used for the smoothening, polishing and buffing of fabricated metal workpieces.
The various machining principles and processes employing abrasives, (mineral) materials that can shape a workpiece by eroding excessive parts of it, such as grinding, honing, sanding, buffing, diamond wire cutting, polishing, abrasive blasting, tumbling, water-jet cutting, and others.
Various processing methods on precious metals such as gold, silver and platinum.