Kitchen unit installer jobs in Finland
Kitchen unit installers install kitchen elements in homes. They take the necessary measurements, prepare the room, removing old elements if necessary, and install the new kitchen equipment, including the connection of water, gas and sewage pipes and electricity lines.
Kitchen unit installer – how much is the pay in Finland?
What the trade paid in 2024
| Median | 19.53 €/h |
|---|---|
| Bottom tenth | 14.57 €/h |
| Top tenth | 25.59 €/h |
| Employees | 13,913 |
Pay by sex, 2024
| Sex | Median | Employees |
|---|---|---|
| Women | 16.35 €/h | 435 |
| Men | 19.63 €/h | 13,478 |
Kitchen unit installer - Which skills are essential?
Handle safe unloading of goods from transportation vehicles.
Gather goods to be transported and place them in a transportation vehicle.
Remove taps using the appropriate tool, such as a tap wrench, a monkey wrench or a ratcheting wrench. Perform the same operations to replace the tap with a repaired or new one.
A variety of common plumbing tools and their usage cases, limitations and risks.
Install various types of cooktops onto prepared surfaces. Attach gas or electricity supply.
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Stretch a line covered in fine, non-staining chalk between two points and snap it against a surface to produce a straight line.
Install gas or electric ovens. Prepare the surface or oven compartment and test whether the oven fits. Attach the relevant pipes or cables.
Check construction supplies for damage, moisture, loss or other problems before using the material.
Check the water pressure in a water circulation system, using a built-in gauge or by attaching a water pressure gauge onto a pipe. In the case of a stand-alone gauge, be sure to depressurise the system before attaching the gauge.
Lay different types and sizes of PVC piping in prepared spaces. Cut the piping to size and attach it by using glue or other systems. Make sure the piping has a clean edge, is free of strains and has the right tilt for fluids to run through.
A variety of types of piping and piping materials. PVC, CPVC, PEX, copper, and the advantages, usage cases, risks, and costs of each.
Safely install gas pipes and tubes made of steel or copper. Install all necessary connectors and modern ball valves. Test the pipe to make sure there are no leaks.
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
Install a variety of metal or plastic profiles used to attach materials to each other or to structural elements. Cut them to size if called for.
Use hinges, knobs and rails to fix wooden hardware on wooden elements. Make sure the hardware fits onto or into the element. Make sure moving hardware articulates smoothly and securely.
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Understand the principles of electricity and electrical power circuits, as well as the associated risks.
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
Kitchen unit installer - Which skills are useful but not essential?
Manually or automatically sort waste by separating it into its different elements.
Use the appropriate copper pipes to serve as gas lines. Cut the pipes to size and remove any sharp ridges after cutting. Flare the ends with the right size flare to facilitate the attachment of connectors. Avoid kinking the pipe and discard any kinked piping.
Administer complaints and negative feedback from customers in order to address concerns and where applicable provide a quick service recovery.
Connect electrical equipment, such as dishwashers, ovens and refrigerators, to the electricity network and perform electrical bonding to avoid dangerous potential differences. Test the installation for proper functioning.
Use different types of drywall sanders, automatic or manual, handheld or on an extension, to sand surfaces to a smooth finish or to rough them up for better adhesion.
Cover floors, ceiling, skirting boards and any other surfaces with various materials such as plastic or textile to keep them from being damaged or stained when performing construction or renovation work like painting or plastering.
The manufacturer's instructions needed to install household devices such as washing machines, dishwashers, refrigerators etc.
Different types of cooking surface, such as gas stoves, induction cooktops and ceramic cooktops. Functional and aesthetic properties of each, their advantages and disadvantages, and price points.
Dispose of waste materials which pose no risk to health and safety in a manner which complies with recycling and waste management procedures.
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Know road transport regulations at regional, national, and European level in matters of safety and environmental requirements.
Keep the working area and equipment clean and orderly.
The capacity and the limits of the commissioned vehicle in terms of weight, type of cargo it can handle, and other cargo loading specifications.
Pack different kinds of goods such as finished manufactured products or goods in use. Pack goods by hand in boxes, bags and other types of containers.
Accept payments from customers by cash money or credit cards.
Install systems of pipes, drains, fittings, valves, and fixtures designed for the distribution of potable water for drinking, heating, washing and waste removal.
Use GPS Systems.
File and organise personal administration documents comprehensively.
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
Make attachments between PEX pipes and between PEX and other materials. Put a copper crimp ring around both ends. Insert a connector piece between the cable ends and use the appropriate size crimp tool to crimp the rings. Check the crimp operation using a go-no-go tool.
Cut a narrow channel in a wall or other partition in order to run cables through it. Cut the channel straight and without causing unnecessary damage. Be sure to avoid existent wires. Lead the cables through the chase and fill it up with the appropriate material.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Perform bending techniques in order to shape metal sheets into parts used in the manufacture of objects.
Demonstrate how to use a product in a correct and safe manner, provide customers with information on the product's main features and benefits, explain operation, correct use and maintenance. Persuade potential customers to purchase items.
Operate a variety of hand tools designed for grinding production materials, such as angle grinders, die grinders, grindstones, bench grinders, and others.
Handle orders placed by customers. Receive the customer order and define a list of requirements, a working process, and a time frame. Execute the work as planned.
Operate various machinery and equipment to cut wood in different sizes and shapes.
Use a hand drill to make holes in various types of material such as stone, brick and wood. Take care to use the appropriate equipment, settings, drill bit and pressure for the task.