Staircase installer jobs in Finland
Staircase installers put in place standard or custom designed staircases between the various levels in buildings. They take the necessary measurements, prepare the site, and install the staircase safely.
Staircase installer – how much is the pay in Finland?
What the trade paid in 2024
| Median | 19.53 €/h |
|---|---|
| Bottom tenth | 14.57 €/h |
| Top tenth | 25.59 €/h |
| Employees | 13,913 |
Pay by sex, 2024
| Sex | Median | Employees |
|---|---|---|
| Women | 16.35 €/h | 435 |
| Men | 19.63 €/h | 13,478 |
Staircase installer - Which skills are essential?
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Stretch a line covered in fine, non-staining chalk between two points and snap it against a surface to produce a straight line.
Bind wooden materials together using a variety of techniques and materials. Determine the optimal technique to join the elements, like stapling, nail, gluing or screwing. Determine the correct work order and make the joint.
Bring construction materials, tools and equipment to the construction site and store them properly taking various aspects into account such as the workers' safety and protection from deterioration.
The various tools used to process wood, such as planers, chisels and lathes.
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Check construction supplies for damage, moisture, loss or other problems before using the material.
Install handrails on stairs or balustrades. Firmly anchor the handrail onto newel posts or directly to the floor.
Set stair carriages to their final position. Fix them to the top terminal, usually with a headboard. Fix the carriage to the bottom terminal and block it from sliding over the floor with a brace. Fix the carriage to the wall if called for.
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
Use a variety of techniques on a wood surface to ensure it is free of dust, sawdust, grease, stains, and other contaminants.
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Securely fasten the treads of a staircase and their vertical counterparts, the risers, to the structural support element or elements of the stair. Screw or nail the risers and treads onto the structure, like stringers, carriages or I-beam. Use adhesives to prevent creaking if called for.
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
Use a variety of techniques to finish wood. Paint, varnish and stain wood to improve its function, durability, or appearance.
Staircase installer - Which skills are useful but not essential?
Calculate the appropriate measures for the rise and run of each stair, taking into account the total height and depth of the stairs, any floor covering, and the range of stair measurements that allow comfortable use.
Install spindles, vertical elements that connect a handrail to a bottom element such as a staircase or balustrade bottom. Mostly decorational, they may also prevent people or objects falling through gaps and provide some structural support.
Manually or automatically sort waste by separating it into its different elements.
Select and apply appropriate restoration techniques in order to achieve the required restoration goals. This encompasses preventive measures, remedial measures, restoration processes and management processes.
Provide advice on and test a wide range of construction materials.
Make up prices and documents for the products that customers may purchase.
Lay the carpet in the right location and remove wrinkles. Cut surplus carpet at the corners to facilitate handling.
Cover floors, ceiling, skirting boards and any other surfaces with various materials such as plastic or textile to keep them from being damaged or stained when performing construction or renovation work like painting or plastering.
Evaluate how much stock is used and determine what should be ordered.
Keep the working area and equipment clean and orderly.
Make cuts in a plank of solid wood to carry stair treads and risers. Take measurements and calculations into account to make markings on the carriage with a steel square. Cut the carriage using a power saw or hand saw.
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
Shave, plane and sand wood manually or automatically to produce a smooth surface.
Estimate the cost implications of restoring and replacing products or parts.
Draw up plans to show how the material will be cut into functional pieces to minimise loss of material.
Handle automated or non-automated industrial wood routers, which feature a routing head that moves over the wood, going up and down to regulate the depth of the incision.
File and organise personal administration documents comprehensively.
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
Use computer-aided design (CAD) systems to assist in the creation, modification, analysis, or optimisation of a design.
Different ways of cutting wood, across the grain or parallel with it, and radial or tangential to the core. The behaviour of cuts of wood under different circumstances and the optimal cut for a given purpose. Influence of special attributes of the wood, like knots or defects.
Create architectural sketches for the design and detail specifications of interiors and exteriors to scale.
Handle an industrial table saw, which cuts with a rotating circular blade built into a table. Set the height of the saw to control the depth of the cut. Pay particular attention to safety, as factors such as natural stresses within the wood may produce unpredictable forces.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Determine restoration needs and requirements and plan the activities. Consider the desired results, the level of intervention required, evaluation of alternatives, constraints on actions, stakeholder demands, possible risks and future options.
Set up a variety of temporary infrastructure used on building sites. Put up fences and signs. Set up any construction trailers and make sure that these are connected to electricity lines and water supply. Establish supplies stores and garbage disposal in a sensible manner.
Use a hand drill to make holes in various types of material such as stone, brick and wood. Take care to use the appropriate equipment, settings, drill bit and pressure for the task.
Take necessary precautions and follow a set of measures that assess, prevent and tackle risks when working at a high distance from the ground. Prevent endangering people working under these structures and avoid falls from ladders, mobile scaffolding, fixed working bridges, single person lifts etc. since they may cause fatalities or major injuries.
Install newel posts, which provide stability to the stairs and balusters. Cut the newel post to the right dimensions and finish. Anchor the post firmly into place with bolts or screws.
Different types of carpet based on materials, production method, backing, fitting techniques, cost, durability, aesthetics and other criteria.