Tile fitter jobs in Finland
Tile fitters install tiles onto walls and floors. They cut tiles to the right size and shape, prepare the surface, and put the tiles in place flush and straight. Tile fitters may also take on creative and artistic projects, with some laying mosaics.
Tile fitter – how much is the pay in Finland?
What the trade paid in 2024
| Median | 21.39 €/h |
|---|---|
| Bottom tenth | 15.82 €/h |
| Top tenth | 30.94 €/h |
| Employees | 1,577 |
Pay by sex, 2024
| Sex | Median | Employees |
|---|---|---|
| Women | 18.78 €/h | 179 |
| Men | 21.75 €/h | 1,398 |
Tile fitter - Which skills are essential?
Fill the space intentionally created to allow for expansion or contraction of the construction materials with a sealant such as silicone.
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Stretch a line covered in fine, non-staining chalk between two points and snap it against a surface to produce a straight line.
Bring construction materials, tools and equipment to the construction site and store them properly taking various aspects into account such as the workers' safety and protection from deterioration.
Firmly place the tiles on a surface prepared with adhesive. Adjust their position to so they are flush and evenly spaced. Take care not to disturb the surface. Insert spacers in the joints. When working vertically with heavy tiles, place a supporting piece of timber to prevent slippage if called for. Remove any excess adhesive from the face of the tile.
Check construction supplies for damage, moisture, loss or other problems before using the material.
Use grout, silicone paste, mastic or other appropriate material to fill the joints between tiles. Spread the mixture onto the tiles using a padded trowel or float. Make sure the mixture is worked into the joints before removing excess material. Use a diagonal motion to avoid scooping material from the joints. Wash material from the front of the tiles and buff the tiles to finish.
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
Different adhesive materials for different types of tile, surfaces, drying times, environmental conditions and costs.
The various sanding techniques (such as gang sanding), as well as the different sanding papers necessary for which surface.
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
Cut tiles to the right size and shape using a wet tile saw. Set up the wet saw and attach it to a water source if called for. Mark the desired shape and size on the tile. Push the tile against the rotating carbide blade of the saw to make a straight cut. For curved cuts, make straight incisions at right angles along the desired curve. Snap off the resulting 'fingers' and finish the curve with a diamond file.
Mix construction materials with water and other materials based on the appropriate recipe. Mix thoroughly to prevent lumps. Avoid contamination, which will adversely affect the properties of the mixture.
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Apply the tile adhesive, often thinset, to the surface. Load the notch trowel with adhesive and paste it to the wall to form a thin, even layer. Take the drying time of the material and your working speed into account to make sure the adhesive does not dry out. Remove excess adhesive. Apply silicone or mastic along the edges, anywhere slight movement is expected, or for improved moisture resistance.
Tiles of different sizes, materials and glazing. Their properties such as weight, propensity to chipping or breaking, moisture resistance, adhesion and cost.
Plan the position of the tiling on the surface. Mark straight and flush lines to determine the position of the tiles. Decide on the spacing between the tiles. If tiles have to be cut to size, avoid small slivers as they may be hard or nearly impossible to cut, depending on type of tile and equipment used.
Tile fitter - Which skills are useful but not essential?
Use the appropriate tools to cut and chip mosaic for fitting into the workpiece.
Select and apply appropriate restoration techniques in order to achieve the required restoration goals. This encompasses preventive measures, remedial measures, restoration processes and management processes.
Provide advice on and test a wide range of construction materials.
Make up prices and documents for the products that customers may purchase.
Cover floors, ceiling, skirting boards and any other surfaces with various materials such as plastic or textile to keep them from being damaged or stained when performing construction or renovation work like painting or plastering.
Evaluate how much stock is used and determine what should be ordered.
Remove mould and stains, assess the damage and identify the cause, remove the old adhesive to replace broken tiles, repair joints and apply new protective layers.
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Use a special carbide tipped drill bit to cut holes in tile. Apply masking tape or another appropriate covering material to protect against chipping and to keep the drill bit from slipping. Mark the spot and nick it slightly with a punch. Apply medium pressure to the drill to prevent chipping or breaking.
Keep the working area and equipment clean and orderly.
Make sure the planned surface has the necessary slope to prevent puddling of water or fluids.
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
The history of art and artists, the artistic trends throughout centuries and their contemporary evolutions.
Set of principles based on which something is appealing and beautiful.
Place insulation material, often shaped into rolls, in order to insulate a structure from thermical or acoustic influences and to prevent fire. Attach the material using face staples, inset staples, or rely on friction to keep the material in place.
Estimate the cost implications of restoring and replacing products or parts.
File and organise personal administration documents comprehensively.
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Use silicone to securely attach accessories, such as soap holders, to tile. Paste silicone onto the accessory and press it firmly against the tile. Hold it in place to dry if necessary.
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
Create a mosaic by laying out individually cut pieces of suitable materials, such as glass, ceramics, or shells, in artful shapes. Work with one or several mosaic techniques, such as direct mosaic, indirect mosaic and double inverse mosaic.