Инженер по электромагнитным системам — работа в Финляндии
Electromagnetic engineers design and develop electromagnetic systems, devices, and components, such as electromagnets in loudspeakers, electromagnetic locks, conducting magnets in MRI's, and magnets in electric motors.
Инженер по электромагнитным системам - Какие навыки обязательны?
Conduct a comprehensive and systematic research of information and publications on a specific topic. Present a comparative evaluative literature summary.
Reply to private consumer requests according to REACh Regulation 1907/2006 whereby chemical Substances of Very High Concern (SVHC) should be minimal. Advise customers on how to proceed and protect themselves if the presence of SVHC is higher than expected.
The technologies used in transmission of information or energy via electromagnetic waves between 1000 and 100,000 MHz.
Electricity is created when electric current flows along a conductor. It entails the movement of free electrons between atoms. The more free electrons are present in a material, the better this material conducts. The three main parameters of electricity are the voltage, current (ampère), and resistance (ohm).
The engineering elements like functionality, replicability, and costs in relation to the design and how they are applied in the completion of engineering projects.
The national and international regulations with regards to the use and manufacture of electrical equipment on the workfloor. These regulations provide rules and guidelines on topics such as general risk management, electrical equipment manufacture, electrical equipment testing, electrical equipment installation, warning labels, and certificates.
Collect data and statistics to test and evaluate in order to generate assertions and pattern predictions, with the aim of discovering useful information in a decision-making process.
Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.
Understand design drawings detailing the design of products, tools, and engineering systems.
Understand electrical engineering, a field of engineering that deals with the study and application of electricity, electronics, and electromagnetism.
The study of electromagnetic forces and the interaction between electric and magnetic fields. The interaction between electrically charged particles can create magnetic fields with a certain range or frequency and electricity can be produced by the changing of these magnetic fields.
Conduct inspections and tests of services, processes, or products to evaluate quality.
Adjust designs of products or parts of products so that they meet requirements.
Mathematics is the study of topics such as quantity, structure, space, and change. It involves the identification of patterns and formulating new conjectures based on them. Mathematicians strive to prove the truth or falsity of these conjectures. There are many fields of mathematics, some of which are widely used for practical applications.
Gain, correct or improve knowledge about phenomena by using scientific methods and techniques, based on empirical or measurable observations.
Model and simulate the designed electromagnets or products utilising electromagnetism using technical design software. Assess the viability of the product and examine the physical parameters to ensure a successful production process.
Create technical designs and technical drawings using specialised software.
The natural science involving the study of matter, motion, energy, force and related notions.
The environmental policies and legislation applicable in a certain domain.
The current legislation applicable in relation to the rights of consumers in the marketplace.
Interpret and analyse data collected during testing in order to formulate conclusions, new insights or solutions.
The threats for the environment which are related to biological, chemical, nuclear, radiological, and physical hazards.
Design and develop conducting electromagnets or products and machines using electromagnetism, such as loudspeakers and MRI machines. Make sure the requirements for performance, reliability, and manufacturability are met.
Read the technical drawings of a product made by the engineer in order to suggest improvements, make models of the product or operate it.
Design prototypes of products or components of products by applying design and engineering principles.
Comply with regulations banning heavy metals in solder, flame retardants in plastics, and phthalate plasticisers in plastics and wiring harness insulations, under EU RoHS/WEEE Directives and China RoHS legislation.
Magnets in which magnetic fields are produced by electric current. By manipulating the electric current, the magnetic fields can be changed and manipulated as well, which allows more control than permanent non-electric magnets. Electromagnets are commonly used in electrical devices, such as loudspeakers, hard disks, MRI devices, and electric motors.
The different electromagnetic wavelenghts or frequencies that are situated on the electromagnetic spectrum. Wavelenghts are divided in several categories according to their wavelength and energy level, starting from radio wavelenghts with a long wavelength and a low energy level, to microwaves, infrared, visible light, ultraviolet, X-rays, and finally Gamma-rays with a short wavelength and a high energy level.
Produce research documents or give presentations to report the results of a conducted research and analysis project, indicating the analysis procedures and methods which led to the results, as well as potential interpretations of the results.
Understand the principles of electricity and electrical power circuits, as well as the associated risks.
Operate devices, machinery, and equipment designed for scientific measurement. Scientific equipment consists of specialised measuring instruments refined to facilitate the acquisition of data.
Ensure that the materials provided by suppliers comply with the specified requirements.
Prepare early models or prototypes in order to test concepts and replicability possibilities. Create prototypes to assess for pre-production tests.
Develop testing protocols to enable a variety of analyses of products, systems, and components.
Give consent to the finished engineering design to go over to the actual manufacturing and assembly of the product.
Инженер по электромагнитным системам - Какие навыки полезны, но не обязательны?
Prepare documentation for existing and upcoming products or services, describing their functionality and composition in such a way that it is understandable for a wide audience without technical background and compliant with defined requirements and standards. Keep documentation up to date.
Respond to and communicate with customers in the most efficient and appropriate manner to enable them to access the desired products or services, or any other help they may require.
Apply and work with a variety of techniques in the process of soldering, such as soft soldering, silver soldering, induction soldering, resistance soldering, pipe soldering, mechanical and aluminium soldering.
The study of sound, its reflection, amplification and absorption in a space.
Systems that can use radio waves or microwaves to capture the speed, direction, range, and altitude of objects. It can be used for the detection of aeroplanes, ships, and weather formations.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Define and describe the criteria by which data quality is measured for manufacturing purposes, such as international standards and manufacturing regulations.
Create detailed technical plans of machinery, equipment, tools and other products.
Technologies that allow the transmission of analogue or digital information signals over a point-to-point or a point-to-multipoint through the use of communication channels or transmission media, such as optical fibre, copper wire, or wireless communication channels. The information or data are usually transmitted as an electromagnetic signal, such as radio waves or microwaves.
Plan, coordinate and supervise engineering activities together with engineers and engineering technicians. Ensure clear and effective channels of communication across all departments. Make sure the team is aware of the standards and objectives of the research and development.
The software to perform computer-aided engineering (CAE) analysis tasks such as Finite Element Analysis and Computional Fluid Dynamics.
Use electronic, mechanical, electric, or optical precision tools for precision work.
Set up a list of materials, components, and assemblies as well as the quantities needed to manufacture a certain product.
Use computer-aided design (CAD) systems to assist in the creation, modification, analysis, or optimisation of a design.
Explain technical details to non-technical customers, stakeholders, or any other interested parties in a clear and concise manner.
Manage and plan various resources, such as human resources, budget, deadline, results, and quality necessary for a specific project, and monitor the project's progress in order to achieve a specific goal within a set time and budget.
The biomedical engineering processes used to create medical devices, prostheses and in treatments.
Establish a positive, long-term relationship between organisations and interested third parties such as suppliers, distributors, shareholders and other stakeholders in order to inform them of the organisation and its objectives.
Observe principles in keeping an engineering watch. Take over, accept and hand over a watch. Perform routine duties undertaken during a watch. Maintain the machinery space logs and the significance of the readings taken. Observe safety and emergency procedures. Observe safety precautions during a watch and take immediate actions in the event of fire or accident, with particular reference to oil systems.
Lead and guide employees through a process in which they are taught the necessary skills for the perspective job. Organise activities aimed at introducing the work and systems or improving the performance of individuals and groups in organisational settings.
Create the drawings that identify the different components and materials, and that provide instructions as to how they should be assembled.
Estimate the expected input in terms of time, human and financial resources necessary to achieve the project objectives.
Convert market requirements into product design and development.