Инженер по лётным испытаниям — работа в Финляндии
Flight test engineers work with other systems engineers to plan the tests in detail and to make sure that the recording systems are installed for the required data parameters. They analyse the data collected during test flights and produce reports for individual test phases and for the final flight test. They are also responsible for the safety of the test operations.
Инженер по лётным испытаниям - Какие навыки обязательны?
Materials and techniques required in the production and distribution processes.
The engineering elements like functionality, replicability, and costs in relation to the design and how they are applied in the completion of engineering projects.
Know the setting, features and operation of aircraft flight control systems. Manage flight control surfaces, cockpit controls, connections, and operating mechanisms required to control the flight direction of an aircraft. Operate aircraft engine controls in order to change aircraft speed.
Operate radio navigation instruments to determine the position of aircraft in the airspace.
Use radios that can receive and transmit sound signals in order to communicate with similar radios on the same frequency such as mobile phones and walkie talkies.
The steps required through which a material is transformed into a product, its development and full-scale manufacturing.
Adjust designs of products or parts of products so that they meet requirements.
Gain, correct or improve knowledge about phenomena by using scientific methods and techniques, based on empirical or measurable observations.
Create technical designs and technical drawings using specialised software.
Drawing software and the various symbols, perspectives, units of measurement, notation systems, visual styles and page layouts used in technical drawings.
The systematic approach to the development and maintenance of engineering systems.
Interpret and analyse data collected during testing in order to formulate conclusions, new insights or solutions.
Supervise the installation of the aircraft sensors and recording systems during the flight tests to ensure that they meet required data paramaters.
The field of engineering concerned with the development, improvement, and implementation of complex processes and systems of knowledge, people, equipment, etc.
Understand aviation meteorology to deal with the impact of weather on air traffic management (ATM). Understand how thorough changes in pressure and temperature values at airports can create variations in head and tail-wind components, and may impose low visibility operating conditions. Knowledge of aviation meteorology can help to reduce negative impact on the ATM system by diminishing disruption and the consequent problems of disturbed flow rates, lost capacity and induced additional costs.
Ensure that every aircraft complies with applicable regulation and all components and equipment have officially valid components.
Draft the test plan by describing manoeuvre-by-manoeuvre for each test flight in order to measure take-off distances, rate of climb, stall speeds, manoeuvrability and landing capacities.
The body of legislation and regulations that apply to the field of civil aviation at regional, national, European and International levels. Understand that regulations aimed at protecting citizens at all times in civil aviation; ensure that operators, citizens, and organisations comply with these rules.
Give consent to the finished engineering design to go over to the actual manufacturing and assembly of the product.
Инженер по лётным испытаниям - Какие навыки полезны, но не обязательны?
Types of flight rules which are a compilation of regulations that allow pilots to fly aircrafts in clear as well as unclear weather conditions whereby it is declared that outside visual reference to the ground and other obstructions are not safe.
Conduct inspections in the aviation industry; inspect plants where aircraft parts are manufactured to ensure safety and quality control. Ensure that aircraft components are manufactured in compliance with safety and design specifications.
The equipment and instruments used for the monitoring and controlling of processes, such as valves, regulators, circuit breakers, and relays.
Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.
Understand electrical engineering, a field of engineering that deals with the study and application of electricity, electronics, and electromagnetism.
The engineering discipline that combines various technologies and engineering disciplines such as avionics, materials science and aerodynamics in order to design, develop and manufacture aircraft, spacecraft, missiles and satillites.
Operates control panels in the cockpit or flight deck according to the needs of the flight. Manage on-board electronic systems to ensure a smooth flight.
Perform flight manoeuvres in critical situations, and associated ‘upset’ manoeuvres, in order to avoid collision.
The scientific field that deals with the way gases interact with moving bodies. As we usually deal with atmospheric air, aerodynamics is primarily concerned with the forces of drag and lift, which are caused by air passing over and around solid bodies.
Perform normal and cross-wind take-off and landing operations.
The functioning of electronic circuit boards, processors, chips, and computer hardware and software, including programming and applications. Apply this knowledge to ensure electronic equipment runs smoothly.
Discipline that applies principles of physics, engineering and materials science to design, analyse, manufacture and maintain mechanical systems.
The science and engineering discipline that attempts to control process variables of production and manufacturing. It also focuses on the design of systems with desired behaviours. These systems use sensors to measure the output performance of the device that is being controlled.
Conduct experimental, environmental and operational tests on models, prototypes or on the systems and equipment itself in order to test their strength and capabilities under normal and extreme conditions.
Perform checks before and during flight: conduct pre-flight and in-flight inspections of aircraft performance, route and fuel usage, runway availability, airspace restrictions, etc.
Другие профессии
- Инженер авиационно-космической техники
- Инженер по автоматизации
- Инженер по спутниковым системам
- Инженер по подвижному составу
- Инженер-испытатель
- Инженер по обработке поверхностей
- Инженер-механик
- Инженер по автомобилестроению
- Инженер-сварщик
- Инженер-робототехник
- Инженер-конструктор резервуаров и ёмкостей
- Инженер по динамическому оборудованию