Кузнец-штамповщик на механических прессах — работа в Финляндии
Mechanical forging press workers set up and tend mechanical forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of preset, compressive forces provided by cranks, cams and toggles at reproducible strokes.
Кузнец-штамповщик на механических прессах - Какие навыки обязательны?
The various part of a mechanical press used for forging metalworking processes, such as cams, cranks and toggles in the preset, a ram, upper die, lower die, and others.
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
Identify operating problems, decide what to do about it and report accordingly.
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
The various processes in the metalforming practices of forging, such as swaging, open-die forging, automatic hot forging, cogging, impression-die forging, roll forging, upsetting, press forging, and others.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Ensure the necessary, usually constant, temperature of processed metal workpieces during metal fabrication processes.
Remove the accumulated scale, or metal 'flakes', on the surface of the metal workpiece caused by oxidation after removal from the furnace by spraying it with an oil-based liquid that will cause it to flake off during the forging process.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
Tend a mechanical forging press, designed for forming hot or cold metal by use of a high energy force mechanically, monitor and operate it, according to regulations.
Кузнец-штамповщик на механических прессах - Какие навыки полезны, но не обязательны?
Various processing methods on non-ferrous metals and alloys such as copper, zinc and aluminium.
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
Tend a hydraulic forging press, designed for forming hot or cold metal by use of a high energy force hydraulically, monitor and operate it, according to regulations.
Supply the machine with the necessary tools and items for a particular production purpose.
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Keep records of the machine's faults, interventions and irregularities for quality control.
Apply preparatory treatment, through mechanical or chemical processes, to the workpiece preceding the main operation.
The production of metal structures for construction.
Manually position and hold a, potentially heated, metal work piece for the machine to perform the necessary metalworking processes on it. Take the forming character of the machine into account in order to optimally place and maintain the processed work piece.
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
The variety of technologies and techniques, such as forging, pressing, stamping, rolling and others, used for the forming processes of metal product manufacturing.
Monitor the flow of the work pieces on the conveyor belt as they are processed by the machine to ensure optimal productivity.
Operate the appropriate forging tools and equipment safely, including forging tongs for handling and moving hot metal workpieces during forging processes.
The manufacture of reservoirs, tanks and similar containers of metal, of types normally installed as fixtures for storage or manufacturing use. The manufacture of metal containers for compressed or liquefied gas.
The qualities and applications of various kinds of dies, the different components of a die (such as the die block, punch plate, pierce punch and others) and the types of die used in specialised manufacturing processes ( such as extrusion dies, drawing dies, forming dies, cutting dies, compound dies, and others).
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
Offer help and advice to service technicians in case of machine malfunctions and other repair tasks.
The manufacture of pails, cans, drums, buckets, boxes, through metalworking processes.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
The metalworking process of forging whilst hot metal is right below its recrystallisation temperature, being cooled and solidified after casting.
The manufacture of electrical ovens and water heaters by metalworking processes.
Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
Transport heavy objects using lifting equipment such as cranes, forklifts etc.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
The manufacture of metal doors, windows and their frames, shutters and gates, and the metal room partitions for floor attachment.
The metalworking process of forging whilst the hot metal is right above its recrystallisation temperature after casting and being solidified.
The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
Set up and programme an automotive robot working on machine processes and substituting or collaboratively supporting human labour, such as the six-axis automotive robot.
Types of presses used in the metal forging process, such as hydraulic and mechanical forging presses.
Evaluate if a replacement of the die of a machine is deemed beneficial and take the necessary actions for replacing it either manually (depending on its size, by the use of a manual lifting tackle) or mechanically.
The manufacture of steam or other vapour generators, the manufacture of auxiliary plant for use with steam generators: condensers, economisers, superheaters, steam collectors and accumulators. The manufacture of nuclear reactors, parts for marine or power boilers. Also the production of pipe system construction comprising further processing of tubes generally to make pressure pipes or pipe systems together with the associated design and construction work.
Various processing methods on precious metals such as gold, silver and platinum.
Другие профессии
- Кузнец на гидравлических прессах
- Кузнец-штамповщик
- Оператор высадочного станка
- Вальцовщик прокатного стана
- Оператор станков с ЧПУ
- Оператор ротационно-ковочной машины
- Штамповщик
- Сварщик точечной сварки
- Оператор станка для удаления заусенцев
- Оператор станка лазерной резки
- Оператор расточного станка
- Сварщик электронно-лучевой сварки