Оператор машины газокислородной резки — работа в Финляндии
Oxy fuel burning machine operators set up and tend machines designed to cut, or rather burn off, excess material from the metal workpiece using a torch that heats the metal workpiece to its kindling temperature and subsequently burns it into a metal oxide upon its reaction with an emitted stream of oxygen, flowing out of the workpiece's created kerf as slag.
Оператор машины газокислородной резки — какая зарплата в Финляндии?
Сколько платили в отрасли в 2024 году
| Медиана | 18,51 €/h |
|---|---|
| Нижний дециль | 14,37 €/h |
| Верхний дециль | 24,18 €/h |
| Работников по найму | 13 244 |
Зарплата по полу, 2024
| Пол | Медиана | Работников по найму |
|---|---|---|
| Женщины | 16,45 €/h | 827 |
| Мужчины | 18,66 €/h | 12 417 |
Оператор машины газокислородной резки - Какие навыки обязательны?
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
Identify operating problems, decide what to do about it and report accordingly.
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
Measure the size of a processed part when checking and marking it to check if it is up to standard by use of two and three dimensional precision measuring equipment such as a caliper, a micrometer, and a measuring gauge.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Ideal temperature of tools and machinery equiped with torches to perform various metal processing on workpieces.
Dispose of possibly hazardous waste material created in the cutting process, such as swarf, scrap and slugs, sort according to regulations, and clean up workplace.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
Employ cross-reference tools and programmes, listing file names and line numbers, to identify part numbers, descriptions, and the vendor as source of origin.
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
The various qualities, hazards and applications of gaseous fuels, such as oxy-acetylene, oxy-gasoline, oxy-hydrogen and others.
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
The behaviour of liquids and gases that represent a serious explosion and fire danger, and their appropriate handling systems and effective storage.
Оператор машины газокислородной резки - Какие навыки полезны, но не обязательны?
Method of quality control that uses statistics to monitor processes.
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
Keep records of the machine's faults, interventions and irregularities for quality control.
The variety of cutting technologies, such as software or mechanics, guiding cutting processes through lasering, sawing, milling etc.
The production of metal structures for construction.
Test processed workpieces or products for basic faults.
The most optimal rotation or cycle time and over-all quality of a tool or a machine's processes.
Understand electrical engineering, a field of engineering that deals with the study and application of electricity, electronics, and electromagnetism.
Evaluate how much stock is used and determine what should be ordered.
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
Read and comprehend standard blueprints, machine, and process drawings.
The manufacture of reservoirs, tanks and similar containers of metal, of types normally installed as fixtures for storage or manufacturing use. The manufacture of metal containers for compressed or liquefied gas.
Use computer-aided manufacturing (CAM) programmes to control machinery and machine tools in the creation, modification, analysis, or optimisation as part of the manufacturing processes of workpieces.
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
Operate a cutting torch fueled by oxyacetylene gas safely to perform cutting processes on a workpiece.
Inspect and mark parts of the workpiece to indicate how they will fit into the finished product.
The manufacture of electrical ovens and water heaters by metalworking processes.
Set up the desired product design in the CNC controller of the CNC machine for product manufacturing.
Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
Evaluate when to invest in replacing machines or machine tools and take the necessary actions.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
The composition, structure, and properties of substances and the processes and transformations that they undergo; the uses of different chemicals and their interactions, production techniques, risk factors, and disposal methods.
The manufacture of metal doors, windows and their frames, shutters and gates, and the metal room partitions for floor attachment.
Understand and assess the models and symbolic language of the GD&T system indicating engineering tolerances.
The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
Apply statistical methods from Design of Experiments (DOE) and Statistical Process Control (SPC) in order to control manufacturing processes.
Theoretical and practical applications of the science studying the action of displacements and forces on physical bodies to the development of machinery and mechanical devices.
The manufacture of steam or other vapour generators, the manufacture of auxiliary plant for use with steam generators: condensers, economisers, superheaters, steam collectors and accumulators. The manufacture of nuclear reactors, parts for marine or power boilers. Also the production of pipe system construction comprising further processing of tubes generally to make pressure pipes or pipe systems together with the associated design and construction work.
Другие профессии
- Оператор станков с ЧПУ
- Оператор установки плазменной резки
- Оператор станка лазерной резки
- Оператор станка гидроабразивной резки
- Оператор шлифовального станка
- Токарь
- Оператор пильного станка по металлу
- Фрезеровщик
- Оператор электроэрозионного станка
- Штамповщик
- Оператор гравировального станка
- Вальцовщик прокатного стана