Оператор намоточной машины — работа в Финляндии
Filament winding operators tend, control and maintain machines that coat filament, usually fibreglass or carbon, in resin and wind them around a rotation mould to produce pipes, containers, tubes and other hollow cylindrical products.
Оператор намоточной машины — какая зарплата в Финляндии?
Сколько платили в отрасли в 2024 году
| Медиана | 17,48 €/h |
|---|---|
| Нижний дециль | 13,58 €/h |
| Верхний дециль | 24,03 €/h |
| Работников по найму | 7 134 |
Зарплата по полу, 2024
| Пол | Медиана | Работников по найму |
|---|---|---|
| Женщины | 15,82 €/h | 1 455 |
| Мужчины | 17,92 €/h | 5 679 |
Оператор намоточной машины - Какие навыки обязательны?
Optimise and maintain the parameters of the production process such as flow, temperature or pressure.
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Identify operating problems, decide what to do about it and report accordingly.
After the filament has been wound onto the mandrel mould and cured enough, remove the mandrel if called for.
Make use of protection equipment according to training, instruction and manuals. Inspect the equipment and use it consistently.
Fibres used to reinforce composite materials, such as glass fibre, carbon fibre and plastic fibre. Their usage cases, costs, advantages and disadvantages, and production techniques associated with their use.
Verify that the overall conditions of the room where the process will take place, such as temperature or air humidity, meet the requirements, and adjust if necessary.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Have knowledge of various types of coating, providing a workpiece with one or more finishing layers of resins, sugars, powders, inactive and insoluable fillers, waxes, gums, plasticisers, colouring materials, lacquer, and others.
Take the necessary steps to let a composite workpiece cure. Switch on heating components like infrared lamps or heated moulds, or introduce the workpiece into a curing oven.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
Measure and adjust temperature of a given space or object.
Fill a reservoir with resin to be used in coating a variety of materials such as filament or glass wool. Make sure the quantity is correct and the resin is of the correct composition and temperature.
Оператор намоточной машины - Какие навыки полезны, но не обязательны?
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
After the filament workpiece has been removed from the winding machine, saw off the pins that keep the workpiece in place on the mandrel in order to facilitate removal of the workpiece.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Adjust the tension of the filament to be wound. Make sure the filament is not so lax as to produce unevenness in the workpiece, or so tight as to introduces deformations in the filament or lower the filament ratio to unacceptably low levels.
Regularly inspect and perform all required activities to maintain the equipment in functional order prior or after its use.
Control remotely the flow of production from the start-up operations to the shutdown of the equipments and systems, using the control panel.
Manage or dispose of significant amounts of waste materials or hazardous materials. Ensure required licenses and permits are in place and reasonable management practices, industry standards, or commonly accepted farming practices followed.
The properties of different materials developped in a laboratory, their usage per type of products, and how to create them.
The process of heating hydrocarbons, forming and combining polymers to create plastic resins which are used to make different kinds of products.
Perform cleaning routines after equipment use.
Maintain required company records and forms in order to report any defective materials or questionable conditions of manufacturing machinery and equipment.
The types and characteristics of synthetic resins which are viscous liquids used for permanently hardening.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
The manufacturing of items used in the daily life, personal use or daily practice. These products include protective safety equipment, drawing equipment, stamps, umbrellas, cigarette lighters, baskets, candles, and many other miscellaneous articles.
Polymerisation is a chemical process which has as output the creation of polymers or polymeric compounds by combining smaller molecules called monomers.
Measure the raw materials prior to their loading in the mixer or in machines, ensuring they conform with the specifications.
After the filament workpiece has been wound, cut the filament to release the workpiece.
Другие профессии
- Оператор пултрузионной установки
- Оператор вакуум-формовочной машины
- Оператор установки по производству стекловолокна
- Мастер производства изделий из пластмасс и резины
- Оператор машины для производства волокна
- Оператор пресса для отжима какао-масла
- Каландровщик пластмасс
- Оператор выдувной машины
- Оператор оборудования для термообработки пластмасс
- Отжигальщик стеклоизделий
- Отжигальщик металла
- Оператор машины компрессионного формования