Оператор раскройной машины — работа в Финляндии
Cutting machine operators check leather, textiles, synthetic materials, dyes and footwear. They select areas of materials to be cut in terms of quality and stretch direction, take the decision of where and how to cut and programme and execute specific technology or machine. The equipment used for large surfaces of materials is frequently an automatic knife. Cutting machine operators position and handle leather or other materials. They adjust cutting machines, match footwear components and pieces, and check cut pieces against specifications and quality requirements.
Оператор раскройной машины — какая зарплата в Финляндии?
Сколько платили в отрасли в 2024 году
| Медиана | 14,85 €/h |
|---|---|
| Нижний дециль | 11,34 €/h |
| Верхний дециль | 19,29 €/h |
| Работников по найму | 690 |
Зарплата по полу, 2024
| Пол | Медиана | Работников по найму |
|---|---|---|
| Женщины | 13,83 €/h | 379 |
| Мужчины | 16,23 €/h | 311 |
Оператор раскройной машины - Какие навыки обязательны?
Apply basic rules of maintenance and cleanliness on footwear and leather goods production equipment and machines that you operate.
The processes, technology and machinery involved in the leather goods manufacturing.
The various procedures and methods in the processing of leather materials and leather goods components like manufacturability and properties.
Adjust and establish the machine technical operating parameters for cutting footwear and leather goods. Check and select the cutting dies, classification of the cut pieces against cutting restrictions, specifications and quality requirements. Check and complete the cutting orders. Perform simple procedures for maintenance of machines.
Functionality of the wide range of equipments and the basic rules of regular maintenance.
The quality specifications of materials, processes, and final products, the most common defects in leather, quick tests procedures, laboratory tests procedures and standards, and the adequate equipment for quality checks.
The characteristics, components, advantages and limitations of a wide range of materials used in footwear production: leather, leather substitutes (synthetics or artificial materials), textile, plastic, rubber etc.
Tthe functionality of the wide range of machines, and the basic rules of regular maintenance.
Cutting rules, variance of the leather properties on its surface and elongation directions of the footwear pieces.
Produce plans for the frequency, operations, components and materials to be used in the maintenance of footwear. Install, program, tune and provide preventive and corrective maintenance for different machines and equipment involved in the footwear manufacturing. Assess the functionality and performance of the various equipment and machines, detect faults and correct problems, make repairs and substitute components and pieces, and perform routine lubrication as well as perform preventive and corrective maintenance. Register all technical information related to the maintenance.
Footwear processes technology and machinery involved. The footwear manufacturing starts in the cutting/clicking room , cutting the uppers and bottom components. The upper components are joined together in the closing room by following a precise order of specific operations: skiving, folding, sewing etc. The closed upper, the insole and other bottom components are brought together in the assembling room, where the main operations are lasting and soling. The process ends with finishing operations in the finishing and packing room.
Quality specifications of materials, processes and final products, the most common defects in footwear, quick tests procedures, laboratory tests procedures and standards, adequate equipment for quality checks. Quality assurance of footwear production processes and fundamental concepts on quality including footwear quality framework and standards.
Check and complete cutting orders, select leather surfaces and classify cut pieces. Identify faults and defects on the leather surface. Recognise colours, shades and type of finishes. Use the following tools: knife, pattern templates, cutting board and marking needle.
Footwear components both for uppers (vamps, quarters, linings, stiffeners, toe puffs etc.) and bottoms (soles, heels, insoles etc.). Ecological concerns and the importance of recycling. Selection of suitable materials and components based on their influence on the footwear style and characteristics, properties and manufacturability. Procedures and methods in chemical and mechanical processing of leather and non-leather materials.
The wide range of materials used in leather goods production: leather, leather substitutes (synthetics or artificial materials), textile, etc; the way of distinguishing among various materials based on their properties, advantages and limitations.
Оператор раскройной машины - Какие навыки полезны, но не обязательны?
Work with the equipment's software. Digitise and mark the leather areas with faults in order to avoid them. Establish nesting and cutting restrictions for each pattern. Pick up, sort, upload patterns, check and complete cutting orders. Adjust the machines and equipment parameters and perform simple procedures for maintenance.
Apply quality control in footwear and leather goods. Analyse the material, component or model using relevant quality criteria. Compare the material and other components received from the suppliers, or the final product, to standards. Use visual observation and report findings. Control the quantity of leather in the warehouse. Submit components to laboratory control test when necessary. Define the corrective measures when called for.
Technology including machinery and techniques for the preparation for leather goods components and footwear uppers.
Assess the environmental impact of footwear manufacture and minimise environmental risks. Reduce environmentally harmful work practices in different stages of the footwear manufacturing.
The use and description of automatic systems technologies used in footwear and leather goods industry such as laser cutting, knife cutting, punch cutting, mill cutting, ultra-sound cutting, water jet cutting and the cutting machinery such as swing beam cutting presses, traveling head die cutting presses or strap cutting machines.
Apply techniques of communication which allow interlocutors to better understand each other and communicate accurately in the transmission of messages.
Analyse, identify and evaluate the possible defects present on raw hides/skins. Defects may be of natural origin (e.g. damage by parasites), caused by bad practices at the farm, in transport, at the abattoir (e.g. incorrect flaying, pre-slaughter defects, improper conservation) or generated during the manufacturing process. The classification of Hides/skins and their subdivision into "selections" is based on the nature, magnitude and location of defects. The class of selection determines the type of processing, and consequently the type of article.
Calculate and establish operative times in footwear and leather goods manufacturing using various method and techniques. Control the production timings, comparing with estimates.
Apply pre-stitching techniques to footwear and leather goods in order to reduce thickness, to reinforce, to mark the pieces, to decorate or to reinforce their edges or surfaces. Be able to operate various machinery for splitting, skiving, folding, stitch marking, stamping, press punching, perforating, embossing, gluing, uppers pre-forming, crimping etc. Be able to adjust the working parameters of the machinery.
Application of computers, computer networks and other information technologies and equipment to storing, retrieving, transmitting and manipulating data, in the context of a business or enterprise.
Другие профессии
- Оператор автоматизированного раскройного станка
- Оператор оборудования для подготовки деталей обуви к пошиву
- Мастер обувного производства
- Техник по ортопедической обуви
- Сапожник
- Мастер кожгалантерейного производства
- Раскройщик кожгалантерейных изделий (ручной раскрой)
- Мастер по пошиву обуви на заказ
- Техник по обслуживанию обувного оборудования
- Технолог обувного производства
- Оператор оборудования кожгалантерейного производства
- Оператор оборудования обувного производства