Оператор ванны окунания — работа в Финляндии
Dip tank operators set up and tend dip tanks, which are coating machines, designed to provide otherwise finished work pieces with durable coating by dipping them in a tank of a specific sort of paint, preservative or molten zinc.
Оператор ванны окунания — какая зарплата в Финляндии?
Сколько платили в отрасли в 2024 году
| Медиана | 17,42 €/h |
|---|---|
| Нижний дециль | 13,71 €/h |
| Верхний дециль | 22,56 €/h |
| Работников по найму | 1 536 |
Зарплата по полу, 2024
| Пол | Медиана | Работников по найму |
|---|---|---|
| Женщины | 16,50 €/h | 208 |
| Мужчины | 17,65 €/h | 1 328 |
Оператор ванны окунания - Какие навыки обязательны?
The body of rules, procdeures and regulations related to safety, health and welfare of people in their workplace.
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
The various steps in the process of dipping a workpiece in a coating material solution, including immersion, start-up, deposition, drainage, and, possibly, evaporation.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
The set-up and different parts of a dip-coating machine, or dip tank, such as the tank made from noncombustible material, drain board, steel supports, rack and pinion, cylinder lifting, and lifting yoke.
The various kinds of paint used as coating in manufacturing finishing processes, such as primers, intermediate coats, finish coats, stripe coats, and others.
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
Tend a manufacturing machine designed to coat workpiece surfaces by applying dip-coating machine processes, monitor and operate it according to regulations.
Оператор ванны окунания - Какие навыки полезны, но не обязательны?
Various processing methods on non-ferrous metals and alloys such as copper, zinc and aluminium.
Steps in the processing of wood for the manufacturing of wooden articles and types of machines used for these processes such as drying, shaping, assembling and surface finishing.
Clean industrial containers and prepare them according to specific requirements.
Prevent steel or iron workpieces from rusting and other corrosion by applying a protective zinc coating to the metal surface through the process of galvanisation by using methods such as hot-dip galvanisation or electrogalvanisation.
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Apply preparatory treatment, through mechanical or chemical processes, to the workpiece preceding the main operation.
The manufacture of different cutlery items, such as forks, spoons, knives, razors or scissors.
Observe and identify various kinds of imperfections in metal workpieces or finished products. Recognise the best fitted manner of fixing the problem, which could be caused by corrosion, rust, fractures, leaks, and other signs of wear.
Dispose of dangerous materials such as chemical or radioactive substances according to environmental and to health and safety regulations.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
The manufacture of flatware , hollowware , dinnerware and other non-electrical utensils for use at the table or in the kitchen.
The various types of tanks used for coating and dipping processes, such as hydro dipping tank, paint dip tank, and others.
The manufacture of metal cable, plaited bands and other articles of that typr, uninsulated or insulated cable not capable of being used as a conductor of electricity, coated or cored wire as well as barbed wire, wire fencing, grill, netting, cloth etc. Manufacture of coated electrodes for electric arc-welding, nails and pins, chain and springs (except watch springs): as well as leaves for springs.
Distinguish grade marks for each piece of lumber. These are based on its several possible strengths and defects. It allows grouping lumber into different size categories.
The manufacture of reservoirs, tanks and similar containers of metal, of types normally installed as fixtures for storage or manufacturing use. The manufacture of metal containers for compressed or liquefied gas.
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
Apply different chemicals to wood in order to increase its natural resistance and prevent deterioration.
The manufacture of rivets, washers and similar non-threaded products, screw machine products, screws, nuts and similar threaded products.
Offer help and advice to service technicians in case of machine malfunctions and other repair tasks.
Observe and listen to machinery operation to detect malfunction. Service, repair, adjust, and test machines, parts, and equipment that operate primarily on the basis of mechanical principles. Maintain and repair vehicles meant for cargo, passengers, farming and landscaping.
Mix the powder dye with water and/or liquid dye and any other necessary ingredients to create the desired colour and apply it to the wood.
Confer a printed, often decorative, coat from a basecoat sheet to a metal surface by dipping the metal workpiece in a hydro dip tank filled with water at a temperature of 30 to 33 degree celcius and the sheet with the desired print.
Types of plastic materials and their chemical composition, physical properties, possible issues and usage cases.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
The manufacture of metal items that can be attached to a door in order to support its function and appearance. The manufacture of padlocks, locks, keys, hinges and the like, and hardware for buildings, furniture, vehicles etc.
The manufacture of tins and cans for food products, collapsible tubes and boxes, and of metallic closures.
Operate equipment designed to buff and polish metal workpieces, such as diamond solutions, silicon-made polishing pads, or working wheels with a leather polishing strop, and others.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
The various processes and technologies used for to coating and painting fabricated metal workpieces.
The manufacture of knives and cutting blades for machines or for mechanical appliances, hand tools such as pliers, screwdrivers etc. The manufacture of non-power-driven agricultural hand tools, saws and saw blades, including circular saw blades and chainsaw blades. The manufacture of interchangeable tools for hand tools, whether or not power-operated, or for machine tools: drills, punches, milling cutters etc. The manufacture of press tools, moulding boxes and moulds (except ingot moulds), vices and clamps, and blacksmiths’ tools: forges, anvils etc.
The manufacture of steam or other vapour generators, the manufacture of auxiliary plant for use with steam generators: condensers, economisers, superheaters, steam collectors and accumulators. The manufacture of nuclear reactors, parts for marine or power boilers. Also the production of pipe system construction comprising further processing of tubes generally to make pressure pipes or pipe systems together with the associated design and construction work.
Другие профессии
- Оператор установки нанесения покрытий
- Гальваник
- Оператор установки анодирования
- Оператор станков с ЧПУ
- Оператор круглошлифовального станка
- Оператор плоскошлифовального станка
- Оператор распылителя лака
- Оператор опиловочного станка
- Оператор станка для удаления заусенцев
- Мастер по антикоррозийной обработке
- Оператор высечного пресса
- Оператор расточного станка