Оператор волочильного стана — работа в Финляндии
Metal drawing machine operators set up and operate drawing machines for ferrous and non-ferrous metal products, designed to provide wires, bars, pipes, hollow profiles and tubes with their specific form by reducing its cross-section and by pulling the working materials through a series of drawing dies.
Оператор волочильного стана — какая зарплата в Финляндии?
Сколько платили в отрасли в 2024 году
| Медиана | 19,36 €/h |
|---|---|
| Нижний дециль | 14,22 €/h |
| Верхний дециль | 24,89 €/h |
| Работников по найму | 5 344 |
Зарплата по полу, 2024
| Пол | Медиана | Работников по найму |
|---|---|---|
| Женщины | 17,37 €/h | 588 |
| Мужчины | 19,71 €/h | 4 756 |
Оператор волочильного стана - Какие навыки обязательны?
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
Identify operating problems, decide what to do about it and report accordingly.
Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
The most optimal rotation or cycle time and over-all quality of a tool or a machine's processes.
Monitor the processing of a workpiece in motion, such as a piece of metal or wood moved linearly over a static manufacturing machine.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
The qualities and applications of various kinds of dies, the different components of a die (such as the die block, punch plate, pierce punch and others) and the types of die used in specialised manufacturing processes ( such as extrusion dies, drawing dies, forming dies, cutting dies, compound dies, and others).
The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
The various kinds of metalworking drawing processes performed at room temperature, such as wire drawing, tube drawing, ironing, embossing, sheet metal drawing, spinning, stretch forming, and others.
Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.
Оператор волочильного стана - Какие навыки полезны, но не обязательны?
Various processing methods on non-ferrous metals and alloys such as copper, zinc and aluminium.
Keep records of the machine's faults, interventions and irregularities for quality control.
Test processed workpieces or products for basic faults.
Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
Tend a drawing machine designed for forming cold or hot metal into bars, monitor and operate it, according to regulations.
Tend a drawing machine designed for forming cold or hot metal into tubes, monitor and operate it, according to regulations.
The variety of technologies and techniques, such as forging, pressing, stamping, rolling and others, used for the forming processes of metal product manufacturing.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Monitor the flow of the work pieces on the conveyor belt as they are processed by the machine to ensure optimal productivity.
The manufacture of metal cable, plaited bands and other articles of that typr, uninsulated or insulated cable not capable of being used as a conductor of electricity, coated or cored wire as well as barbed wire, wire fencing, grill, netting, cloth etc. Manufacture of coated electrodes for electric arc-welding, nails and pins, chain and springs (except watch springs): as well as leaves for springs.
Tend a drawing machine designed for forming cold or hot metal into wire, monitor and operate it, according to regulations.
The manufacture of rivets, washers and similar non-threaded products, screw machine products, screws, nuts and similar threaded products.
Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
Offer help and advice to service technicians in case of machine malfunctions and other repair tasks.
Inspect and mark parts of the workpiece to indicate how they will fit into the finished product.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
The manufacture of metal items that can be attached to a door in order to support its function and appearance. The manufacture of padlocks, locks, keys, hinges and the like, and hardware for buildings, furniture, vehicles etc.
Transport heavy objects using lifting equipment such as cranes, forklifts etc.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Handle fabricated, drawn metal wire safely by calculating the risks and dangers of its unreliable nature due to spring force and resilience.
The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
The various types of drawing processes in metal fabrication, such as wire drawing, bar drawing, tube drawing, and others.
Various processing methods on precious metals such as gold, silver and platinum.
Другие профессии
- Оператор экструдера
- Оператор сеткоплетельной машины
- Вальцовщик прокатного стана
- Оператор ротационно-ковочной машины
- Оператор станков с ЧПУ
- Оператор станка для удаления заусенцев
- Оператор токарного автомата
- Оператор высечного пресса
- Кузнец-штамповщик
- Навивщик пружин
- Оператор станка для изготовления цепей
- Оператор высадочного станка