Сервисный монтажник систем отопления и вентиляции — работа в Финляндии
Heating, ventilation, air conditioning (and refrigeration) service engineers install and maintain industrial heating, air conditioning and possibly refrigeration systems. They set up furnaces, thermostats, ducts, vents, and other equipment needed to ensure the controlled passage and treatment of air. They also carry out repairs.
Сервисный монтажник систем отопления и вентиляции — какая зарплата в Финляндии?
Сколько платили в отрасли в 2024 году
| Медиана | 20,69 €/h |
|---|---|
| Нижний дециль | 15,51 €/h |
| Верхний дециль | 27,34 €/h |
| Работников по найму | 3 592 |
Зарплата по полу, 2024
| Пол | Медиана | Работников по найму |
|---|---|---|
| Женщины | 17,82 €/h | 81 |
| Мужчины | 20,75 €/h | 3 511 |
Сервисный монтажник систем отопления и вентиляции - Какие навыки обязательны?
Handle the different transfer pumps used to keep a refrigerant in the liquid phase at the right pressure for an optimal accuracy and speed of the charging station.
The characteristics and properties of the different fluids used in heat pump and refrigeration cycles.
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Apply specialised membranes to prevent penetration of a structure by dampness or water. Securely seal any perforation to preserve the damp-proof or waterproof properties of the membrane. Make sure any membranes overlap top over bottom to prevent water from seeping in. Check the compatibility of multiple membranes used together.
Identify, report and repair equipment damage and malfunctions; communicate with field representatives and manufacturers to obtain repair and replacement components.
Use welding equipment to melt and join together pieces of metal or steel; wear protective eyewear during the working process.
Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.
Test electrical equipment for malfunctions. Take safety measures, company guidelines, and legislation concerning electrical equipment into account. Clean, repair and replace parts and connections as required.
Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
Install equipment which is dependent on electric currents or electromagnetic fields in order to work, or equipment to generate, transfer or measure such currents and fields. This equipment includes switchboards, electric motors, generators or direct current systems.
Place heating, ventilation, air conditioning and refrigeration boilers, which heats up water and circulates it through a closed radiator system to distribute heat around a structure. Connect the boiler to a source of fuel or electricity and to the circulation system. Connect it to the water supply if it features an automatic filling system. Configure the boiler.
Check machinery and equipment to ensure reliable performance during use and operations in worksites.
The power transmission systems that use the force of flowing liquids to transmit power.
Use equipment to test performance and operation of machinery.
Install ducts to deliver and remove air. Determine whether the duct should be flexible or not, and select the appropriate material based on projected usage. Waterproof and airproof the duct and insulate it against temperature influence to ensure maximum efficiency and prevent contamination with mould. Make the correct connections between the ducts and endpoints.
Perform the maintenance on installed equipment on-site. Follow procedures to avoid uninstalling equipment from machinery or vehicles.
The branch of physics that deals with the relationships between heat and other forms of energy..
The characteristics and properties of fluids, including gases, liquids and plasmas, at rest and in motion, and the forces on them.
Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
Install equipment to enable the ventilation of a structure. Mount fans and install air inlets and outlets. Install ducts to permit the transfer of air. Configure the ventilation system if it is electronically controlled.
The different parts constituing heating, air conditioning and refrigeration systems such as the different valves, fans, compressors, condensers, filters and other components.
Install air conditioning devices, which remove heat, and often moisture, from the air through a variety of mechanisms. Create the necessary openings through walls and floors and place the device. Connect it to a power supply. Configure the device.
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
Check and repair electronic equipment. Detect malfunction, locate faults and take measures to prevent damage.
Operate the electric machine used to apply hot melt adhesive to join two pieces of material.
Understand the principles of electricity and electrical power circuits, as well as the associated risks.
Pictorial representation of an electrical circuit. It shows the components of the circuit as simplified shapes, and the power and signal connections between the devices. It gives information about the relative position and arrangement of devices and terminals on the devices, to help in building or servicing the device. A wiring diagram is often used to troubleshoot problems and to make sure that all the connections have been made and that everything is present.
Theoretical and practical applications of the science studying the action of displacements and forces on physical bodies to the development of machinery and mechanical devices.
Place a furnace which heats air to be distributed around a structure. Connect the furnace to a source of fuel or electricity and connect any air ducts to guide the heated air. Configure the furnace.
Use soldering equipment, such as a soldering gun, a soldering torch or a gas-powered iron, to melt and join together pieces of metal or steel.
Use a hand drill to make holes in various types of material such as stone, brick and wood. Take care to use the appropriate equipment, settings, drill bit and pressure for the task.
Сервисный монтажник систем отопления и вентиляции - Какие навыки полезны, но не обязательны?
Install heat pumps, which use the physical properties of substances called refrigerants to extract heat from an environment and release it to a warmer environment, counter to spontaneous heat flow. Create the necessary openings and install the indoors and outdoors parts of the heat pump. Connect electricity and any ducts, and configure the heat pump.
Prepare documentation for existing and upcoming products or services, describing their functionality and composition in such a way that it is understandable for a wide audience without technical background and compliant with defined requirements and standards. Keep documentation up to date.
Monitor activities and perform tasks ensuring compliance with standards involving environmental protection and sustainability, and amend activities in the case of changes in environmental legislation. Ensure that the processes are compliant with environment regulations and best practices.
Utilise computer equipment or digital devices to facilitate quality control, data management, and communication. Follow instructions given by a computer programme, create computer files or documents.
Use the appropriate copper pipes to serve as gas lines. Cut the pipes to size and remove any sharp ridges after cutting. Flare the ends with the right size flare to facilitate the attachment of connectors. Avoid kinking the pipe and discard any kinked piping.
Lead, supervise and motivate a group of people, in order to meet the expected results within a given timeline and with the foreseen resources in mind.
Command products from relevant suppliers to get convenient and profitable products to purchase.
Make up prices and documents for the products that customers may purchase.
Place solar water heaters, which use sunlight to heat water. Find a good location for the heaters, often on the roof of a structure, place them, and connect them to the water supply. Set up the water heater for use.
Dispose of dangerous materials such as chemical or radioactive substances according to environmental and to health and safety regulations.
Install the system of pipes used to transport a fluid, be it a liquid or a gas, from one point to another and connect it to the fuel and water supply lines, air ducts, and other components.
Identify problems with servers, desktops, printers, networks, and remote access, and perform actions which solve the problems.
Safely install gas pipes and tubes made of steel or copper. Install all necessary connectors and modern ball valves. Test the pipe to make sure there are no leaks.
Install heating circuits, often sold as mats, into floors and walls. Strip the existing floor or wall covering if necessary. Roll out the mats and test them for continuity. Attach the mats to the surface if necessary and connect them to a power supply. Cover the circuits with mortar, drywall or other appropriate materials.
Estimate the cost implications of restoring and replacing products or parts.
Define and make a list of the required resources and equipment based on the technical needs of the production.
The functioning of electronic circuit boards, processors, chips, and computer hardware and software, including programming and applications. Apply this knowledge to ensure electronic equipment runs smoothly.
Install heaters that burn wood or pulp-based pellets to generate heat. Attach any ducts and install an exhaust pipe. Configure the wood heater if it contains an electronic control unit.
File and organise personal administration documents comprehensively.
Inform customers about necessary repairs or replacements, discuss products, services and costs, include accurate technical information.
Prepare documents with legal value which prove that an installation or a facility is conform to the regulations.
Install gas heaters, which burn fossil fuels such as methane, butane, or LPG to heat air. Attach an exhaust vent if required. Configure the gas heater if it features electronic control.
Explain technical details to non-technical customers, stakeholders, or any other interested parties in a clear and concise manner.
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Cut a narrow channel in a wall or other partition in order to run cables through it. Cut the channel straight and without causing unnecessary damage. Be sure to avoid existent wires. Lead the cables through the chase and fill it up with the appropriate material.
Demonstrate how to use a product in a correct and safe manner, provide customers with information on the product's main features and benefits, explain operation, correct use and maintenance. Persuade potential customers to purchase items.
Prepare the invoice of goods sold or services provided, containing individual prices, the total charge, and the terms. Complete order processing for orders received via telephone, fax and internet and calculate the customer’s final bill.
Lead and guide employees through a process in which they are taught the necessary skills for the perspective job. Organise activities aimed at introducing the work and systems or improving the performance of individuals and groups in organisational settings.
Write records of the repairs and maintenance interventions undertaken, of parts and materials used, and other repair facts.
Take necessary precautions and follow a set of measures that assess, prevent and tackle risks when working at a high distance from the ground. Prevent endangering people working under these structures and avoid falls from ladders, mobile scaffolding, fixed working bridges, single person lifts etc. since they may cause fatalities or major injuries.
Другие профессии
- Техник по системам отопления
- Электромеханик по лифтам
- Техник по медицинской технике
- Механик сельскохозяйственных машин
- Техник по текстильному оборудованию
- Наладчик формовочных машин
- Техник по кузнечному оборудованию
- Техник по гидравлическим и пневматическим системам
- Наладчик пневматических систем
- Механик строительной техники
- Техник по системам отопления, вентиляции, кондиционирования и холодоснабжения
- Инженер по техническому обслуживанию и ремонту