Сушильщик древесины — работа в Финляндии
Wood drying kiln operators control the process of applying heat to moist or 'green' wood in order to obtain usable dry wood. Depending on the type of kiln, the drying operator will be responsible for moving the wood into and out of the kiln, temperature control, and ventilation.
Сушильщик древесины — какая зарплата в Финляндии?
Сколько платили в отрасли в 2024 году
| Медиана | 16,72 €/h |
|---|---|
| Нижний дециль | 12,67 €/h |
| Верхний дециль | 23,18 €/h |
| Работников по найму | 489 |
Зарплата по полу, 2024
| Пол | Медиана | Работников по найму |
|---|---|---|
| Женщины | 16,95 €/h | 49 |
| Мужчины | 16,72 €/h | 440 |
Сушильщик древесины - Какие навыки обязательны?
Stack and align timber in neat and separate layers to make it ready for kiln drying.
The amount of water contained in wood materials. The effect of wood moisture on the size and physical characteristics of the wood. Suitable moisture contents for different uses.
Monitor the product temperature using the available tools and measuring instruments and adjust furnace temperature if needed.
Identify a range of possible drying defects and their mutual causes.
Key features, advantages and limitations of the different timbers and timber based products sold at a company and where to access this information.
Control and monitor the kiln so that it fires ware (greenware or decorations) according to specified thickness and hardness.
The offered construction materials, their functionalities, properties and legal and regulatory requirements.
Acclimatise wooden materials to make sure they will not change size after installation, which may cause damage or produce an otherwise inadequate result. Leave the material in climatic circumstances very similar to those in the location where they will be used. Allow several days for the wood to acclimatise, depending on the type and circumstances.
Kiln characteristics, operation and types such as periodic kilns, updraft kilns, downdraft kilns, sprung arch kilns, or catenary arch kilns.
Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
Load materials in furnace with correct positioning, fastening and levelling when needed.
Prepare kiln schedules, which consist of predetermining a set of temperatures and humidity conditions for different periods or stages of drying.
Identify the main types of timber based products to be received at your company. Stack and store timber based products safely and in compliance with company procedures.
Adjust machine settings to adapt drying processes, drying times, and special treatments to the requirements of the requested wood to be dried.
Put the materials in an oven and heat them for a certain amount of time and to a specific temperature to shape or cure the material.
Identify the main types of timber to be received at your company. Stack and store timber safely and in compliance with company procedures.
The various wood products such as lumber and furniture, their functionalities, properties and legal and regulatory requirements.
Dry timber stacks with modern and dated kiln technologies, such as dehumidification, solar, vacuum and conventional drying.
Managing a product specific and energy efficient kiln ventilation.
Сушильщик древесины - Какие навыки полезны, но не обязательны?
Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.
Keep records of the machine's faults, interventions and irregularities for quality control.
Operate a forklift, a vehicle with a pronged device in front for lifting and carrying heavy loads.
Operate measurement instruments to measure parts of manufactured objects. Take into consideration specifications of manufacturers to perform the measuring.
Operate a hydraulic grappler, an attachment to heavy machinery used to grab and manipulate cylindrical objects such as trees or pipes. Lift up the object, safely manoeuvre it, and set it down in the desired position.
Perform small maintenance tasks on drawing kiln such as replacing the cooling pads of the jacket and plugging in the kiln with mortar.
Work together with others in a dangerous, sometimes noisy, environment, such as a building on fire or metal forging facilities, in order to achieve a higher degree of efficiency while heeding the co-workers' safety.
The types of mechanical ventilation systems that permits the exchange and circulation of air.
Supervise and organise the area in which products are stored.
Measure the amount of timber felled using appropriate equipment. Take care of the equipment. Record the measured data.
Perform safety audits and inspections on workplaces and workplace equipment. Ensure that they meet safety regulations and identify hazards and risks.
Unload, prepare and move freshly treated wood to an appropriate post-treatment drying area.
Perform cleaning routines after equipment use.
Prepare a comprehensive and unbiased report on wood technology production and progressive development of wood based materials.
Maintain required company records and forms in order to report any defective materials or questionable conditions of manufacturing machinery and equipment.
Be acquainted with methods of chamber drying timber, such as air and artificial drying.
Heating systems fuelled by gas, wood, oil, biomass, solar power, and other reneable energy sources and their energy saving principles, applicable specifically to industrial buildings and facilities.
Inspect the stock to find out how much is left. Identify any damaged, faulty, or out of date items and move them to the appropriate location. Follow stock rotation methods to ensure stock is used effectively. Handle goods using safe and approved handling methods.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Use any of various types of pile drivers to drive piles made of timber into the ground for structure stabilisation purposes. Take care to position the pile and pile driver correctly and apply the correct amount of force to drive the pile while preventing damage and physical stresses.
Evaluate the quality of the felled timber.
Другие профессии
- Пропитчик древесины
- Оператор окорочного станка
- Сортировщик пиломатериалов
- Оператор лесопильного оборудования
- Оператор рубительной машины
- Оператор линии производства древесных пеллет
- Изготовитель деревянных поддонов
- Оператор оборудования для производства древесных плит
- Оператор ленточной пилы
- Оператор круглопильного станка
- Оператор шпонострогального станка
- Шлифовщик по дереву