Укладчик ковровых покрытий — работа в Финляндии
Carpet fitters lay rolls of carpet as a floor covering. They cut the carpet to size, prepare the surface, and put the carpet in place.
Укладчик ковровых покрытий — какая зарплата в Финляндии?
Сколько платили в отрасли в 2024 году
| Медиана | 21,39 €/h |
|---|---|
| Нижний дециль | 15,82 €/h |
| Верхний дециль | 30,94 €/h |
| Работников по найму | 1 577 |
Зарплата по полу, 2024
| Пол | Медиана | Работников по найму |
|---|---|---|
| Женщины | 18,78 €/h | 179 |
| Мужчины | 21,75 €/h | 1 398 |
Укладчик ковровых покрытий - Какие навыки обязательны?
Apply ergonomy principles in the organisation of the workplace while manually handling equipment and materials.
Lay the carpet in the right location and remove wrinkles. Cut surplus carpet at the corners to facilitate handling.
Apply a suitable adhesive to a floor or underlay to keep a floor covering, such as carpet or linoleum, in place. Spread the adhesive evenly and wait the appropriate time for the adhesive to get tacky, but not dry out before laying the covering.
Bring construction materials, tools and equipment to the construction site and store them properly taking various aspects into account such as the workers' safety and protection from deterioration.
Check construction supplies for damage, moisture, loss or other problems before using the material.
Securely attach two pieces of carpet at the edges. Use a carpet iron to heat seaming tape and press the carpet onto the tape to fuse the seam.
Make sure the floor is free of dust, protrusions, moisture and mould. Remove any traces of previous floor coverings.
Apply the relevant health and safety procedures in construction in order to prevent accidents, pollution and other risks.
Finish carpet edges cleanly and securely. Tuck the carpet into the space between the grippers and the wall or skirting, or obtain a clean edge by other techniques.
Cut the carpet with a sharp knife according to the cutting plan. Make straight cuts and avoid causing damage to the carpet or surroundings.
Interpret and understand plans and drawings in manufacturing processes which include representations in three dimensions.
Use different measurement instruments depending on the property to be measured. Utilise various instruments to measure length, area, volume, speed, energy, force, and others.
Interpret and understand plans and drawings in manufacturing processes which include representations in two dimensions.
Lay an underlayment or pad on the surface before placing the top surface covering in order to protect the carpet from damage and wear. Tape or staple the underlayment to the floor and attach the edges to each other to prevent intrusion of water or other contaminants.
Different types of carpet based on materials, production method, backing, fitting techniques, cost, durability, aesthetics and other criteria.
Укладчик ковровых покрытий - Какие навыки полезны, но не обязательны?
Lay out the floor plan of the area to be covered on a suitable medium, such as strong paper. Follow any shapes, nooks and crannies of the floor.
Apply specialised membranes to prevent penetration of a structure by dampness or water. Securely seal any perforation to preserve the damp-proof or waterproof properties of the membrane. Make sure any membranes overlap top over bottom to prevent water from seeping in. Check the compatibility of multiple membranes used together.
Provide advice on and test a wide range of construction materials.
Make up prices and documents for the products that customers may purchase.
Use different types of drywall sanders, automatic or manual, handheld or on an extension, to sand surfaces to a smooth finish or to rough them up for better adhesion.
Evaluate how much stock is used and determine what should be ordered.
Work as part of a team in a construction project. Communicate efficiently, sharing information with team members and reporting to supervisors. Follow instructions and adapt to changes in a flexible manner.
Take measurements on site and estimate the amount of materials required for the construction or restoration project.
Set of principles based on which something is appealing and beautiful.
Place insulation material, often shaped into rolls, in order to insulate a structure from thermical or acoustic influences and to prevent fire. Attach the material using face staples, inset staples, or rely on friction to keep the material in place.
File and organise personal administration documents comprehensively.
Order required materials for the construction project, taking care to purchase the most suitable material for a good price.
Receive incoming construction supplies, handle the transaction and enter the supplies into any internal administration system.
Nail carpet grippers at regular intervals into the surface, or use adhesive if the floor is too hard for nailing. Leave space between the equipment and the wall or skirting to tuck the carpet into.
Plan the cuts to be made to minimise the number of seams and the amount of waste materials. Leave a safe surplus around the edges to accommodate fitting.
Use elements of protective clothing such as steel-tipped shoes, and gear such as protective goggles, in order to minimise risk of accidents in construction and to mitigate any injury if an accident does occur.
Maintain records of the progress of the work including time, defects, malfunctions, etc.
Demonstrate how to use a product in a correct and safe manner, provide customers with information on the product's main features and benefits, explain operation, correct use and maintenance. Persuade potential customers to purchase items.